Data Sheet

10.2.3.2 Verification of resistance of insulating materials to normal heat   Meets the product standard's requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat
and fire due to internal electric effects
  Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation   Meets the product standard's requirements.
10.2.5 Lifting   Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact   Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions   Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES   Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances   Meets the product standard's requirements.
10.5 Protection against electric shock   Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components   Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections   Is the panel builder's responsibility.
10.8 Connections for external conductors   Is the panel builder's responsibility.
10.9 Insulation properties   
10.9.2 Power-frequency electric strength   Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage   Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material   Is the panel builder's responsibility.
10.10 Temperature rise   The panel builder is responsible for the temperature rise calculation. Eaton will
provide heat dissipation data for the devices.
10.11 Short-circuit rating   Is the panel builder's responsibility. The specifications for the switchgear must be
observed.
10.12 Electromagnetic compatibility   Is the panel builder's responsibility. The specifications for the switchgear must be
observed.
10.13 Mechanical function   The device meets the requirements, provided the information in the instruction
leaflet (IL) is observed.
Technical data ETIM 7.0
Low-voltage industrial components (EG000017) / Frequency converter =< 1 kV (EC001857)
Electric engineering, automation, process control engineering / Electrical drive / Static frequency converter / Static frequency converter = < 1 kV (ecl@ss10.0.1-27-02-31-01 [AKE177014])
Mains voltage  V 342 - 528
Mains frequency   50/60 Hz
Number of phases input   3
Number of phases output   3
Max. output frequency  Hz 500
Max. output voltage  V 500
Nominal output current I2N  A 2.2
Max. output at quadratic load at rated output voltage  kW 0.75
Max. output at linear load at rated output voltage  kW 0.75
Relative symmetric net frequency tolerance  % 10
Relative symmetric net voltage tolerance  % 10
Number of analogue outputs   1
Number of analogue inputs   2
Number of digital outputs   1
Number of digital inputs   4
With control unit   Yes
Application in industrial area permitted   Yes
Application in domestic- and commercial area permitted   No
Supporting protocol for TCP/IP   No
Supporting protocol for PROFIBUS   No
Supporting protocol for CAN   Yes
Supporting protocol for INTERBUS   No
Supporting protocol for ASI   No
Supporting protocol for KNX   No
Supporting protocol for MODBUS   Yes
Supporting protocol for Data-Highway   No
Supporting protocol for DeviceNet   No
Supporting protocol for SUCONET   No
06/16/2021 Eaton 185721 ED2021 V80.0 EN 4 / 6