Data Sheet

Note   for normal internally and externally ventilated 4 pole, three-phase asynchronous
motors with 1500 rpm
-1
at 50 Hz or 1800 min
-1
at 60 Hz
Note   Overload cycle for 60 s every 600 s
Note   at 400 V, 50 Hz
150 % Overload P kW 0.75
Note   at 440 - 480 V, 60 Hz
150 % Overload P HP 1
Apparent power   
Apparent power at rated operation 400 V S kVA 1.45
Apparent power at rated operation 480 V S kVA 1.75
Braking function   
Standard braking torque   max. 30 % M
N
DC braking torque   adjustable to 100 %
Control section
Reference voltage U
s
V 10 V DC (max. 0.2 mA)
Analog inputs   1, parameterizable, 0 - 10 V DC, 0/4 - 20 mA
Digital inputs   4, parameterizable, 10 - 30 V DC
Relay outputs   1, N/O contact, 6 A (250 V, AC-1) / 5 A (30 V, DC-1)
Interface/field bus (built-in)   OP-Bus (RS485)/Modbus RTU
Assigned switching and protective elements
Power Wiring   
Safety device (fuse or miniature circuit-breaker)   
IEC (Type B, gG), 150 %   FAZ-B6/3
UL (Class CC or J)  A 6
Mains contactor   
150 % overload (CT/I
H
, at 50 °C)   DILM7-…
Main choke   
150 % overload (CT/I
H
, at 50 °C)   DX-LN3-004
Radio interference suppression filter (external, 150 %)   DX-EMC34-008
Radio interference suppression filter, low leakage currents (external, 150 %)   DX-EMC34-008-L
Note regarding radio interference suppression filter   Optional external radio interference suppression filter for longer motor cable
lengths and for use in different EMC environments
Motor feeder   
motor choke   
150 % overload (CT/I
H
, at 50 °C)   DX-LM3-008
Design verification as per IEC/EN 61439
Technical data for design verification   
Rated operational current for specified heat dissipation I
n
A 2.1
Heat dissipation per pole, current-dependent P
vid
W 0
Equipment heat dissipation, current-dependent P
vid
W 28
Static heat dissipation, non-current-dependent P
vs
W 0
Heat dissipation capacity P
diss
W 0
Operating ambient temperature min.  °C -10
Operating ambient temperature max.  °C 60
IEC/EN 61439 design verification   
10.2 Strength of materials and parts   
10.2.2 Corrosion resistance   Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures   Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat   Meets the product standard's requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat
and fire due to internal electric effects
  Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation   Meets the product standard's requirements.
10.2.5 Lifting   Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact   Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions   Meets the product standard's requirements.
06/18/2021 Eaton 174334 ED2021 V80.0 EN 3 / 6