Data Sheet

Climatic proofing ρ
w
% < 95%, average relative humidity (RH), non-condensing, non-corrosive
Air quality   3C3, 3S3
Ambient temperature   
Operating ambient temperature min.  °C -10
Operating ambient temperature max.  °C + 40
   operation (with 150 % overload)
Storage ϑ °C -40 - +60
Radio interference level   
Radio interference class (EMC)   C2, C3, depending on the motor cable length, the connected load, and ambient
conditions. External radio interference suppression filters (optional) may be
necessary.
Environment (EMC)   1st and 2nd environments as per EN 61800-3
maximum motor cable length I m C2 ≤ 5 m
C3 ≤ 25 m
Mounting position   Vertical
Altitude  m 0 - 1000 m above sea level
Above 1000 m: 1% derating for every 100 m
max. 4000 m
Degree of Protection   IP55/NEMA 12
Protection against direct contact   BGV A3 (VBG4, finger- and back-of-hand proof)
Main circuit
Supply   
Rated operational voltage U
e
 400 V AC, 3-phase
480 V AC, 3-phase
Mains voltage (50/60Hz) U
LN
V 380 (-10%) - 480 (+10%)
Input current (150% overload) I
LN
A 34.2
System configuration   AC supply systems with earthed center point
Supply frequency f
LN
Hz 50/60
Frequency range f
LN
Hz 48 - 62
Mains switch-on frequency   Maximum of one time every 30 seconds
Power section   
Function   Variable frequency drive with internal DC link and IGBT inverter
Overload current (150% overload) I
L
A 45
max. starting current (High Overload) I
H
% 200
Note about max. starting current   for 4 seconds every 40 seconds
Output voltage with V
e
U
2
 400 V AC, 3-phase
480 V AC, 3-phase
Output Frequency f
2
Hz 0 - 50/60 (max. 500)
Switching frequency f
PWM
kHz 8
adjustable 4 - 24 (audible)
Operation Mode   U/f control
Speed control with slip compensation
sensorless vector control (SLV)
optional: Vector control with feedback (CLV)
Frequency resolution (setpoint value) Δf Hz 0.1
Rated operational current   
At 150% overload I
e
A 30
Note   Rated operational current at a switching frequency of 8 kHz and an ambient air
temperature of +40°C
Power loss   
Heat dissipation at rated operational current I
e
=150 % P
V
W 375
Efficiency η % 97.5
Heat dissipation at current/speed [%]   
Current = 100%   
Speed = 0 % P
V
W 278
Speed = 50 % P
V
W 323
Speed = 90 % P
V
W 359
Current = 50 %   
Speed = 0 % P
V
W 165
06/16/2021 Eaton 169391 ED2021 V80.0 EN 2 / 6