Data Sheet

Current = 50 %   
Speed = 0 % P
V
W 34
Speed = 50 % P
V
W 35
Maximum leakage current to ground (PE) without motor I
PE
mA 2.49
Fitted with   Radio interference suppression filter
Brake chopper
Additional PCB protection
7-digital display assembly
Safety function   STO (Safe Torque Off, SIL2, PLd Cat 3)
Frame size   FS2
Motor feeder   
Note   for normal internally and externally ventilated 4 pole, three-phase asynchronous
motors with 1500 rpm
-1
at 50 Hz or 1800 min
-1
at 60 Hz
Note   Overload cycle for 60 s every 600 s
Note   at 230 V, 50 Hz
150 % Overload P kW 0.75
Note   at 220 - 240 V, 60 Hz
150 % Overload P HP 1
maximum permissible cable length I m screened: 100
screened, with motor choke: 200
unscreened: 150
unscreened, with motor choke: 300
Apparent power   
Apparent power at rated operation 230 V S kVA 1.71
Apparent power at rated operation 240 V S kVA 1.79
Braking function   
Standard braking torque   max. 30 % M
N
DC braking torque   max. 100% of rated operational current I
e,
variable
Braking torque with external braking resistance   Max. 100% of rated operational current I
e
with external braking resistor
minimum external braking resistance R
min
Ω 100
Switch-on threshold for the braking transistor U
DC
V 390 V DC
Control section
External control voltage U
c
V 24 V DC (max. 100 mA)
Reference voltage U
s
V 10 V DC (max. 10 mA)
Analog inputs   2, parameterizable, 0 - 10 V DC, 0/4 - 20 mA
Analog outputs   2, parameterizable, 0 - 10 V, 0/4 - 20 mA
Digital inputs   3, parameterizable, max. 30 VDC, max. 5 for non-parameterized analog inputs
Digital outputs   2, parameterizable, 24 V DC
Relay outputs   2, parameterizable, 1 N/O and 1 changeover contact, 6 A (250 V, AC-1) / 5 A (30 V,
DC-1)
Interface/field bus (built-in)  
OP-Bus (RS485)/Modbus RTU, CANopen
®
Assigned switching and protective elements
Power Wiring   
Safety device (fuse or miniature circuit-breaker)   
IEC (Type B, gG), 150 %   FAZ-B10/1N
UL (Class CC or J)  A 16
Mains contactor   
150 % overload (CT/I
H
, at 50 °C)   DILM7
Main choke   
150 % overload (CT/I
H
, at 50 °C)   DX-LN1-013
Radio interference suppression filter (external, 150 %)   DX-EMC12-014-FS2
Note regarding radio interference suppression filter   Optional external radio interference suppression filter for longer motor cable
lengths and for use in different EMC environments
DC link connection   
Braking resistance   
10 % duty factor (DF)   DX-BR100-0K2
20 % duty factor (DF)   DX-BR100-0K2
40 % duty factor (DF)   DX-BR100-0K4
06/18/2021 Eaton 169078 ED2021 V80.0 EN 3 / 6