Data Sheet

DATASHEET - RASP-512AI1SL-C320S1
Speed controller, 5.6 A, 2.2 kW, 230/277 V AC, AS-Interface®, S-7.4 for 31
modules, with braking resistance, with fan
Part no. RASP-512AI1SL-C320S1
Catalog No. 150183
Alternate Catalog
No.
RASP-512AI1SL-C320S1

Delivery program
   This item is only available until 06/30/2020, after which it will be replaced with the
following item: 198570, RASP5-5402A31-5120100S1.
Parameterization requires drivesConnect software and accessories or a key pad.
Product range   Speed controller
Rated operational voltage U
e
 400 V AC, 3-phase
480 V AC, 3-phase
Output voltage with V
e
U
2
 0 - U
LN
Mains voltage (50/60Hz) U
LN
V 380 (-15%) - 480 (+10%)
Rated operational current
  
At 150% overload I
e
A 5.6
assigned motor rating P
  
Note   at 400 V, 50 Hz
150 % Overload P kW 2.2
Note   at 480 V, 60 Hz
150 % Overload P HP 3
Note   for normal internally and externally ventilated 4 pole, three-phase asynchronous
motors with 1500 rpm
-1
at 50 Hz or 1800 min
-1
at 60 Hz
Description   integrated PTC thermistor monitoring and Thermoclick with safe isolation
Two sensor inputs through M12 sockets (max. 150 mA) for quick stop and
interlocked manual operation
optional: 4 sensor inputs with M12-Y adapter for switchover to creep speed
Connection of supply voltage via adapter cable on round or flexible busbar junction
Diagnostics and reset on device and via AS-Interface
with AUTO - OFF/RESET - HAND key switches
3 fixed speeds and 1 potentiometer speed
can be switched over from U/f to (vector) speed control
with selector switch REV - OFF - FWD
optional: Faster stop if external 24 V fails
Control voltage external brake (50/60 Hz)  V 230/277 V AC
Interface/field bus (built-in)  
AS-Interface
®
AS-Interface profile cable   S-7.4 for 31 modules
Braking resistance   with braking resistance
Fan   with fan
Instructions for actuation of motors with mechanical brake
integrated brake chopper with braking resistance for dynamic braking
Technical data
General
Standards   IEC/EN 61800-5-1
UL 61800-5-1
Guideline 2011/65/EU (RoHS)
CE approval
UL approval
Climatic proofing ρ
w
% < 95%, non-condensing
IEC/EN 50178
Ambient temperature   
Operating ambient temperature min.  °C 0
Operating ambient temperature max.  °C + 45
Storage ϑ °C -30 - +70
Overvoltage category   III
Rated impulse withstand voltage U
imp
kV 2
Radio interference level   
Environment (EMC)   2. Environment, Class C3
06/18/2021 Eaton 150183 ED2021 V80.0 EN 1 / 4