Data Sheet
NAND-Flash (can be used for data backup): approx. 128 MByte available
NVRAM (retained data): approx. 32 KByte available
External memory SD Memory Card Slot: SDA Specification 1.00
Cooling Fanless CPU and system cooling, natural convection-based passive cooling
Back-up of real-time clock
Battery (service life) non-replaceable, CR2032 soldered in
Backup (time at zero voltage) Normally 10 years
Engineering
Visualisation software GALILEO
EPAM
XSOFT-CODESYS-2
XSOFT-CODESYS-3
PLC-Programming software XSOFT-CODESYS-2
XSOFT-CODESYS-3
PLC-licence PLC licence inclusive
Operating system Windows CE 5.0 (licence incl.)
Interfaces, communication
built-in interfaces 1 x Ethernet 10/100 Mbps
1 x RS232
1 x USB device
1 x CANopen®/easyNet
USB device USB 2.0, not galvanically isolated
RS-232 RS-232, not galvanically isolated (SUB-D plug 9 pole, UNC)
CAN CAN, not galvanically isolated (SUB-D plug 9 pole, UNC)
Profibus PROFIBUS galvanically isolated, max. 1.5 MBit/s (SUB-D socket 9 pole, UNC)
Slots for SD card: 1
Ethernet 100Base-TX/10Base-T
Power supply
Nominal voltage 24 V DC SELV (safety extra low voltage)
permissible voltage Effective: 19.2-30.0 V DC (rated operating voltage -20%/+25%)
Absolute with ripple: 18,0-31,2 V DC
Battery powered: 18,0-31,2 V DC (rated operating voltage -25%/+30%)
35 V DC for a duration of < 100 ms
Voltage dips ms ≤ 10 ms from rated voltage (24 V DC)
5 ms from undervoltage (19.2 V DC)
Power consumption P
max.
W 5
Heat dissipation W 5
Note on heat dissipation Heat dissipation with power consumption for 24 V, all ports and interfaces
connected
Protection against polarity reversal yes
Type of fuse Yes (fuse not accessible)
Potential isolation no potential isolation
General
Housing material Plastic, gray
Front type Standard front with standard membrane (fully enclosed)
Dimensions (W x H x D) mm 136 x 100 x 30
flush mounted Clearance: W x H x D ≥ 30 mm (1.18")
Inclination from vertical: ±45° (if using natural convection)
Weight kg 0.3
Degree of protection (IEC/EN 60529, EN50178, VBG 4) IP65 (at front), IP20 (at rear)
Approvals
Approvals cUL (UL508)
EAC
Explosion protection (according to ATEX 94/9/EC) II 3D Ex II T70°C IP5x: Zone 22, Category 3D
shipping classification DNV GL
Applied standards and directives
EMC (in relation to CE)
EN 61000-6-2
06/18/2021 Eaton 140021 ED2021 V80.0 EN 2 / 5





