Data Sheet

AC  A 15
DC  V 250
DC  A 1
Short Circuit Current Rating  SCCR 
Basic Rating   
SCCR  kA 18
max. Fuse  A 700
max. CB  A 600
480 V High Fault   
SCCR (fuse)  kA 18
max. Fuse  A 700 Class L
SCCR (CB)  kA 65
max. CB  A 250
600 V High Fault   
SCCR (fuse)  kA 18
max. Fuse  A 700 Class J
SCCR (CB)  kA 18
max. CB  A 600
Special Purpose Ratings   
Definite Purpose Ratings (100,000 cycles acc. to UL 1995)   
LRA 480V 60Hz 3phase  A 2160
FLA 480V 60Hz 3phase  A 360
LRA 600V 60Hz 3phase  A 1800
FLA 600V 60Hz 3phase  A 300
Design verification as per IEC/EN 61439
Technical data for design verification   
Rated operational current for specified heat dissipation I
n
A 300
Heat dissipation per pole, current-dependent P
vid
W 7
Equipment heat dissipation, current-dependent P
vid
W 0
Static heat dissipation, non-current-dependent P
vs
W 5.5
Heat dissipation capacity P
diss
W 0
Operating ambient temperature min.  °C -40
Operating ambient temperature max.  °C 60
IEC/EN 61439 design verification   
10.2 Strength of materials and parts   
10.2.2 Corrosion resistance   Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures   Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat   Meets the product standard's requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat
and fire due to internal electric effects
  Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation   Meets the product standard's requirements.
10.2.5 Lifting   Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact   Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions   Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES   Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances   Meets the product standard's requirements.
10.5 Protection against electric shock   Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components   Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections   Is the panel builder's responsibility.
10.8 Connections for external conductors   Is the panel builder's responsibility.
10.9 Insulation properties   
10.9.2 Power-frequency electric strength   Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage   Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material   Is the panel builder's responsibility.
06/16/2021 Eaton 139556 ED2021 V80.0 EN 6 / 12