Data Sheet

ManualsBrandsEaton ManualsAutomationDILEM12-01-G(24VDC) Electrical contactor 3 makers 5.5 kW 1 pc(s)

DATASHEET - DILEM12-01-G(24VDC)

Contactor, 24 V DC, 3 pole, 380 V 400 V, 5.5 kW, Contacts N/C = Normally

closed= 1 NC, Screw terminals, DC operation

Part no. DILEM12-01-G(24VDC)

Catalog No. 127137

Alternate Catalog

No.

XTMC12A01B0

EL-Nummer

(Norway)

4110191

Delivery program

Product range   Contactors

Application   Contactors for Motors

Mini Contactors for Motors and Resistive Loads

Subrange   DILEM contactors

Utilization category   AC-1: Non-inductive or slightly inductive loads, resistance furnaces

NAC-3: Normal AC induction motors: starting, switch oﬀ during running

AC-4: Normal AC induction motors: starting, plugging, reversing, inching

Connection technique   Screw terminals

Description   With auxiliary contact

Number of poles   3 pole

Rated operational current

  

AC-3   

380 V 400 V I

A 12

AC-1   

Conventional free air thermal current, 3 pole, 50 - 60 Hz   

Open   

at 40 °C I

A 22

Max. rating for three-phase motors, 50 - 60 Hz

  

AC-3   

220 V 230 V P kW 3

380 V 400 V P kW 5.5

660 V 690 V P kW 4

AC-4   

220 V 230 V P kW 1.5

380 V 400 V P kW 3

660 V 690 V P kW 3

Contacts

  

N/C = Normally closed   1 NC

Contact sequence  

Instructions   Integrated diode-resistor combination

For use with   …DILE

Actuating voltage   24 V DC

Voltage AC/DC   DC operation

Technical data

General

Standards   IEC/EN 60947, VDE 0660, CSA, UL

Lifespan, mechanical Operations

x 10

Maximum operating frequency   

Mechanical  Ops./h 9000

electrical (Contactors without overload relay) Operations/h  Page 05/070

Climatic prooﬁng   Damp heat, constant, to IEC 60068-2-78

Damp heat, cyclic, to IEC 60068-2-30

06/18/2021 Eaton 127137 ED2021 V80.0 EN 1 / 11

Summary of content (11 pages)

PAGE 1
DATASHEET - DILEM12-01-G(24VDC) Contactor, 24 V DC, 3 pole, 380 V 400 V, 5.5 kW, Contacts N/C = Normally closed= 1 NC, Screw terminals, DC operation Delivery program Part no. Catalog No. Alternate Catalog No.
PAGE 2
Ambient temperature Open °C -25 - +50 Enclosed °C - 25 - 40 Storage °C Min. ambient temperature, storage °C - 40 Ambient temperature, storage max.
PAGE 3
660 V 690 V A 42 Short-circuit protection maximum fuse AC Type ”2”, 500 V gL/gG A 20 Type ”1”, 500 V gL/gG A 35 at 40 °C Ith =Ie A 22 at 50 °C Ith =Ie A 20 at 55 °C Ith =Ie A 19 Ith A 16 AC-1 Rated operational current Conventional free air thermal current, 3 pole, 50 - 60 Hz Open enclosed Notes At maximum permissible ambient air temperature. Conventional free air thermal current, 1 pole Notes At maximum permissible ambient air temperature.
PAGE 4
DC 500 V P kW 3 660 V 690 V P kW 3 12 V Ie A 20 24 V Ie A 20 60 V Ie A 20 110 V Ie A 20 220 V Ie A 20 Rated operational current open DC-1 Magnet systems Voltage tolerance DC operated Pick-up voltage 0.8 - 1.1 Power consumption DC operation Power consumption Pick-up = Sealing VA/W Notes 2.3 Smoothed DC voltage or three-phase bridge rectiﬁer Duty factor % DF 100 Switching times at 100 % Uc Make contact ms Closing delay ms Closing delay min.
PAGE 5
2 60 V A 2.5 3 100 V A 1.5 3 220 V A 0.5 Conv. thermal current Ith A 10 Control circuit reliability Failure rate λ <10 , < one failure at 100 million operations (at Ue = 24 V DC, Umin = 17 V, Imin = 5.4 mA) Operations x 10 6 0.2 Operations x 10 6 0.15 -8 Component lifespan at Ue = 240 V AC-15 DC current L/R = 50 ms: 2 contacts in series at Ie = 0.
PAGE 6
Operating ambient temperature min. °C -25 Operating ambient temperature max. °C 50 IEC/EN 61439 design veriﬁcation 10.2 Strength of materials and parts 10.2.2 Corrosion resistance Meets the product standard's requirements. 10.2.3.1 Veriﬁcation of thermal stability of enclosures Meets the product standard's requirements. 10.2.3.2 Veriﬁcation of resistance of insulating materials to normal heat Meets the product standard's requirements. 10.2.3.
PAGE 7
CSA Class No. 3211-04 North America Certiﬁcation UL listed, CSA certiﬁed Specially designed for North America No Characteristics 1: Overload relay 2: Suppressor 3: Auxiliary contact modules Enclosure totally insulated 06/18/2021 Eaton 127137 ED2021 V80.
PAGE 8
Squirrel-cage motor Operating characteristics Starting:from rest Stopping:after attaining full running speed Electrical characteristics Make: up to 6 x rated motor current Break: up to 1 x rated motor current Utilization category 100 % AC-3 Typical applications Compressors Lifts Mixers Pumps Escalators Agitators Fans Conveyor belts Centrifuges Hinged ﬂaps Bucket-elevators Air conditioning system General drives in manufacturing and processing machines Extreme switching duty Squirrel-cage motor Operating char
PAGE 9
Switching duty for non-motor loads, 3-pole, 4-pole Operating characteristics Non-inductive or slightly inductive loads Electrical characteristics Make: 1 x rated current Break: 1 x rated current Utilization category 100 % AC-1 Typical applications Electric heat 06/18/2021 Eaton 127137 ED2021 V80.
PAGE 10
Short-time loading, 3-pole Time interval between two loading cycles: 15 minutes Dimensions 06/18/2021 Eaton 127137 ED2021 V80.
PAGE 11
2DILE-… + MVDILE + …DILE 2DILE-…-G + MVDILE + …DILE 2DILE-… + MVDILE + …DILE 2DILE-…-G + MVDILE + …DILE 2DILE-… + MVDILE 2DILE-…-G + MVDILE 06/18/2021 Eaton Industries GmbH http://www.eaton.eu © 06/2021 by Eaton Industries GmbH Eaton 127137 ED2021 V80.