Data Sheet

DATASHEET - M22-I1MGE-SAL
Surface mounting enclosure, metal, yellow, 1 mounting location
Part no. M22-I1MGE-SAL
Catalog No. 118456
Alternate Catalog
No.
M22-I1MGE-SALQ

Delivery program
Basic function accessories   Surface mounting enclosure
Housing   Metal
   With high-grade steel screws
Number of locations  Qty. 1
Cable entry knockouts
  
Cable entry   -
Degree of Protection   IP66, IP67, IP69
Colour
  
  
RAL Value   RAL 1004
Connection to SmartWire-DT   no
For use with   1 x ⌀ 22.5
For use with   (Illuminated) pushbuttons
(Illuminated) selector switches
Key-operated pushbuttons
Indicator light
controlled stop/emergency-stop buttons with yellow label
Technical data
General
Degree of Protection   IP66, IP67, IP69
Design verification as per IEC/EN 61439
IEC/EN 61439 design verification   
10.2 Strength of materials and parts   
10.2.2 Corrosion resistance   Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures   Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat   Meets the product standard's requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat
and fire due to internal electric effects
  Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation   Please enquire
10.2.5 Lifting   Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact   Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions   Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES   Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances   Meets the product standard's requirements.
10.5 Protection against electric shock   Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components   Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections   Is the panel builder's responsibility.
10.8 Connections for external conductors   Is the panel builder's responsibility.
10.9 Insulation properties   
10.9.2 Power-frequency electric strength   Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage   Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material   Is the panel builder's responsibility.
06/16/2021 Eaton 118456 ED2021 V80.0 EN 1 / 2