Data Sheet

ManualsBrandsEATON ManualsContactors115948

DATASHEET - DILA-XHI10-S

Auxiliary contact module, 1 pole, Ith= 16 A, 1 N/O, Side mounted, Screw

terminals, DILA, DILM7 - DILM15

Part no. DILA-XHI10-S

Catalog No. 115948

Alternate Catalog

No.

XTCEXSAB10

EL-Nummer

(Norway)

4110209

Delivery program

Accessories   Auxiliary contact modules

Description   with interlocked opposing contacts

Switching elements according to EN 50005

Version E combinations correspond to EN 50011 and are to be preferred.

The DC operated contactor DILA(C)-22 must only be combined with 2-pole auxiliary

contacts.

Function   for standard applications

Number of poles   1 pole

Connection technique   Screw terminals

Rated operational current

  

Conventional free air thermal current, 1 pole   

Open   

at 60 °C I

A 16

AC-15   

220 V 230 V 240 V I

A 4

380 V 400 V 415 V I

A 4

Contacts

  

N/O = Normally open   1 N/O

Mounting type   Side mounted

Contact sequence  

For use with   DILM7…

DILM9…

DILM12…

DILM15…

DILMP20…

DILA…

Type   Side-mounting auxiliary contacts

Instructions   Interlocked opposing contacts according to IEC/EN 60947-5-1 appendix L, inside the

auxiliary contact modules, also for the integrated auxiliary contacts of the DILM 7 -

DILM32

Auxiliary contacts used as mirror contacts according to IEC/EN 60947-4-1 Appendix

F (not N/C late open)

Technical data

General

Standards   IEC/EN 60947, VDE 0660, UL, CSA

Component lifespan   

at U

= 230 V, AC-15, 3 A Operations

x 10

1.3

Climatic prooﬁng   Damp heat, constant, to IEC 60068-2-78

06/18/2021 Eaton 115948 ED2021 V80.0 EN 1 / 5

Summary of content (5 pages)

PAGE 1
DATASHEET - DILA-XHI10-S Auxiliary contact module, 1 pole, Ith= 16 A, 1 N/O, Side mounted, Screw terminals, DILA, DILM7 - DILM15 Part no. Catalog No. Alternate Catalog No. EL-Nummer (Norway) DILA-XHI10-S 115948 XTCEXSAB10 4110209 Delivery program Accessories Auxiliary contact modules Description with interlocked opposing contacts Switching elements according to EN 50005 Version E combinations correspond to EN 50011 and are to be preferred.
PAGE 2
Damp heat, cyclic, to IEC 60068-2-30 Ambient temperature Open °C -25 - +60 Enclosed °C - 25 - 40 Ambient temperature, storage °C - 40 - 80 Degree of Protection IP20 Protection against direct contact when actuated from front (EN 50274) Finger and back-of-hand proof Weight kg Terminal capacities 0.024 2 mm Screw terminals Solid mm 2 1 x (0.75 - 2.5) 2 x (0.75 - 2.5) Flexible with ferrule mm 2 1 x (0.75 - 2.5) 2 x (0.75 - 2.
PAGE 3
AC operated W 1.6 DC operated W 1.6 Current heat loss per auxiliary circuit at Ie (AC-15/230 V) CO 0.1 Rating data for approved types Auxiliary contacts Pilot Duty AC operated A600 DC operated P300 General Use AC V 600 AC A 10 DC V 250 DC A 1 Design veriﬁcation as per IEC/EN 61439 Technical data for design veriﬁcation Rated operational current for speciﬁed heat dissipation In A 4 Heat dissipation per pole, current-dependent Pvid W 0.
PAGE 4
Number of contacts as change-over contact 0 Number of contacts as normally open contact 1 Number of contacts as normally closed contact 0 Number of fault-signal switches 0 Rated operation current Ie at AC-15, 230 V A 4 Type of electric connection Screw connection Model Top mounting Mounting method Side mounting Lamp holder None Approvals Product Standards IEC/EN 60947-4-1; UL 508; CSA-C22.2 No. 14-05; CE marking UL File No. E29184 UL Category Control No. NKCR CSA File No.