Data Sheet

10.2.3.3 Verification of resistance of insulating materials to abnormal heat
and fire due to internal electric effects
  Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation   Please enquire
10.2.5 Lifting   Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact   Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions   Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES   Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances   Meets the product standard's requirements.
10.5 Protection against electric shock   Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components   Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections   Is the panel builder's responsibility.
10.8 Connections for external conductors   Is the panel builder's responsibility.
10.9 Insulation properties   
10.9.2 Power-frequency electric strength   Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage   Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material   Is the panel builder's responsibility.
10.10 Temperature rise   Not applicable.
10.11 Short-circuit rating   Is the panel builder's responsibility. The specifications for the switchgear must be
observed.
10.12 Electromagnetic compatibility   Is the panel builder's responsibility. The specifications for the switchgear must be
observed.
10.13 Mechanical function   The device meets the requirements, provided the information in the instruction
leaflet (IL) is observed.
Technical data ETIM 7.0
Low-voltage industrial components (EG000017) / Front element for mushroom push-button (EC001038)
Electric engineering, automation, process control engineering / Low-voltage switch technology / Command and alarm device / Front element for mushroom push-button actuators
(ecl@ss10.0.1-27-37-12-12 [AKF030014])
Colour button   Red
Construction type lens   Round
Diameter cap  mm 38
Hole diameter  mm 22.5
Width opening  mm 0
Height opening  mm 0
Degree of protection (IP)   IP67/IP69K
Degree of protection (NEMA)   4X
Type of button   Flat
Suitable for illumination   No
Switching function latching   Yes
Spring-return   No
With front ring   No
Material front ring   Plastic
Colour front ring   Chrome
Suitable for emergency stop   Yes
Unlocking method   Key-release
Assets (links)
Declaration of CEConformity
00003256
01/09/2020 Eaton Industries GmbH
http://www.eaton.eu
© 12/2019 by Eaton Industries GmbH
Eaton 111771 ED2019 V63.0 EN
2 / 2