Data Sheet

DATASHEET - CS-44/200
Wall enclosure with mounting plate, HxWxD=400x400x200mm
Part no. CS-44/200
Catalog No. 111684

EL-Nummer
(Norway)
0002466108
Delivery program
Product range   Wall-mounting housing CS
Product function   Wall-mounting housing with mounting plate
Degree of Protection   IP66
IP23 (with ventilating plates)
Description   Foamed polyurethane sealing throughout.
Impact resistance category IK09 to EN 62262.
Sheet steel mounting plate
Bottom plate with foamed gasket.
Single door, door stop on the right, door opening angle 120°
Door hinge pins with quick change technology.
Standardized locking system with sash fastener.
Powder coating RAL 7035 inside and outside
Material   Steel plate
Dimensions
  
Width  mm 400
Height  mm 400
Depth  mm 200
Locks Number  1
Hinges Number  2
Door profile molding Number  2
Flange plates Width x Depth mm 172 x 332
Max. F3A flanges Number  1
Mounting plates
  
Height  mm 370
Width  mm 350
Weight  kg 9.7
Information about equipment supplied   Lock, 3 mm double ward key
Including M6 threaded welded studs for earth conductor connections in the door
Technical data
General
Standards   IEC/EN 62208
RoHS   in accordance with Directive 2015/863/EU of the European Parliament and Council
RoHS (in accordance with Directive 2002/95/EC of the European Parliament and
Council)
  yes
Climatic proofing   Damp heat, constant, to IEC 60068-2-78; Damp heat, cyclical, to IEC 60068-2-30
Ambient temperature  °C -25 - +40
Degree of Protection   IP66
IP23 (with ventilating plates)
Installation conditions   Indoor installation
Power loss   
   Power loss P
v
[W] for fully enclosed sheet steel enclosure CS without internal
partitions for wall mounting.
Example: max. ambient temperature 35°C; Overtemperature ΔT = 20 K; Relative
humidity = 75%.
Max. heat dissipation   
Individual enclosure for wall mounting P
V
W 29
Starting enclosure for wall mounting P
V
W 27
Middle enclosure for wall mounting P
V
W 25
Material characteristics
Material   Steel plate
Surface treatment   Structured powder spray polyester based paint finish
06/18/2021 Eaton 111684 ED2021 V80.0 EN 1 / 4