Data Sheet

ManualsBrandsEaton ManualsAutomationDILMP200(RAC240) Electrical contactor 4 makers 55 kW 1 pc(s)

DATASHEET - DILMP200(RAC240)

Contactor, 4 pole, 200 A, RAC 240: 190 - 240 V 50/60 Hz, AC operation

Part no. DILMP200(RAC240)

Catalog No. 109925

Alternate Catalog

No.

XTCF200G00B

EL-Nummer

(Norway)

4130410

Delivery program

Product range   Contactors

Application   Contactors for 4 pole electric consumers

Subrange   Contactors up to 200 A, 4 pole

Utilization category   AC-1: Non-inductive or slightly inductive loads, resistance furnaces

AC-3/AC-3e: Normal AC induction motors: Starting, switching oﬀ while running

Connection technique   Screw terminals

Number of poles   4 pole

Rated operational current

  

AC-1   

Conventional free air thermal current, 3 pole, 50 - 60 Hz   

at 40 °C I

A 200

at 50 °C I

A 188

at 55 °C I

A 180

at 60 °C I

A 172

Contact sequence  

For use with   DILM150-XHI(A)(V)…

DILM1000-XHI(V)…

Actuating voltage   RAC 240: 190 - 240 V 50/60 Hz

Voltage AC/DC   AC operation

Connection to SmartWire-DT   no

Instructions   Contacts to EN 50 012.

integrated suppressor circuit in actuating electronics

Meets the requirements for voltage reduction protection as set out by VDE-AR-N

4105:2018-11.

Technical data

General

Standards   IEC/EN 60947, VDE 0660, UL, CSA

Lifespan, mechanical   

AC operated Operations

x 10

5.7

Operating frequency, mechanical   

AC operated Operations/h  3600

DC operated Operations/h  3600

Climatic prooﬁng   Damp heat, constant, to IEC 60068-2-3

Damp heat, cyclic, to IEC 60068-2-30

Ambient temperature   

Open  °C -25 - +60

Enclosed  °C - 25 - 40

Storage  °C - 40 - 80

Mounting position   

06/18/2021 Eaton 109925 ED2021 V80.0 EN 1 / 10

Summary of content (10 pages)

PAGE 1
DATASHEET - DILMP200(RAC240) Contactor, 4 pole, 200 A, RAC 240: 190 - 240 V 50/60 Hz, AC operation Delivery program Part no. Catalog No. Alternate Catalog No.
PAGE 2
Mounting position Mechanical shock resistance (IEC/EN 60068-2-27) Half-sinusoidal shock, 10 ms Main contacts N/O contact g 10 N/O contact g 7 N/C contact g 5 Auxiliary contacts Degree of Protection IP00 Altitude m Max.
PAGE 3
Main conducting paths Rated impulse withstand voltage Uimp V AC Rated insulation voltage Ui V AC 690 Rated operational voltage Ue V AC 690 between coil and contacts V AC 440 between the contacts V AC 440 A 1800 According to IEC/EN 60947 220 V 230 V A 1150 380 V 400 V A 1150 500 V A 1150 660 V 690 V A 800 Overvoltage category/pollution degree 8000 III/3 Safe isolation to EN 61140 Making capacity (cos ϕ) Up to 690 V Breaking capacity Short-circuit rating Short-circuit pro
PAGE 4
660 V 690 V Ie A P kWh 220 V 230 V P kW 37 240V P kW 40 380 V 400 V P kW 55 415 V P kW 70 440 V P kW 75 500 V P kW 85 660 V 690 V P kW 90 60 V Ie A 200 110 V Ie A 200 220 V Ie A 200 3 pole, at Ith (60°) W 57 Impedance per pole mΩ 0.6 x Uc 0.8 - 1.15 x Uc 0.8 - 1.15 Drop-out x Uc 0.25 - 0.6 AC operated 50/60 Hz Pick-up VA 180 AC operated 50/60 Hz Pick-up W 150 AC operated 50/60 Hz Sealing VA 3.1 AC operated 50/60 Hz Sealing W 2.
PAGE 5
max. CB A 600 SCCR (fuse) kA 30/100 max. Fuse A 300/300 Class J SCCR (CB) kA 65 max. CB A 250 SCCR (fuse) kA 30/100 max. Fuse A 300/300 Class J SCCR (CB) kA 30 max.
PAGE 6
10.2.7 Inscriptions Meets the product standard's requirements. 10.3 Degree of protection of ASSEMBLIES Does not apply, since the entire switchgear needs to be evaluated. 10.4 Clearances and creepage distances Meets the product standard's requirements. 10.5 Protection against electric shock Does not apply, since the entire switchgear needs to be evaluated. 10.6 Incorporation of switching devices and components Does not apply, since the entire switchgear needs to be evaluated. 10.
PAGE 7
Characteristics 1: Auxiliary contact module 2: Suppressor 06/18/2021 Eaton 109925 ED2021 V80.
PAGE 8
Switching conditions for 4 pole, non-motor loads Operating characteristics Non inductive and slightly inductive loads Electrical characteristics Switch on: 1 x rated operational current Switch oﬀ: 1 x rated operational current Utilization category 100 % AC-1 Typical examples of application Electric heat 06/18/2021 Eaton 109925 ED2021 V80.
PAGE 9
Dimensions Contactors 06/18/2021 Eaton 109925 ED2021 V80.
PAGE 10
distance at side to earthed parts: 10 mm DILMP125 DILMP160 DILMP200 06/18/2021 Eaton Industries GmbH http://www.eaton.eu © 06/2021 by Eaton Industries GmbH Eaton 109925 ED2021 V80.