Data Sheet

ManualsBrandsEaton ManualsAutomationDILM170(RDC24) Electrical contactor 3 makers 90 kW 1 pc(s)

DATASHEET - DILM170(RDC24)

Contactor, 3 pole, 380 V 400 V 90 kW, RDC 24: 24 - 27 V DC, DC operation,

Screw terminals

Part no. DILM170(RDC24)

Catalog No. 107016

Alternate Catalog

No.

XTCE170G00TD

EL-Nummer

(Norway)

4130452

Delivery program

Product range   Contactors

Application   Contactors for Motors

Subrange   Contactors up to 170 A, 3 pole

Utilization category   AC-1: Non-inductive or slightly inductive loads, resistance furnaces

NAC-3: Normal AC induction motors: starting, switch oﬀ during running

AC-4: Normal AC induction motors: starting, plugging, reversing, inching

Notes   Not suitable for motors with eﬃciency class IE3.

Connection technique   Screw terminals

Number of poles   3 pole

Rated operational current

  

AC-3   

Notes   At maximum permissible ambient temperature (open.)

380 V 400 V I

A 170

AC-1   

Conventional free air thermal current, 3 pole, 50 - 60 Hz   

Open   

at 40 °C I

A 225

enclosed I

A 166

Conventional free air thermal current, 1 pole   

open I

A 460

enclosed I

A 415

Max. rating for three-phase motors, 50 - 60 Hz

  

AC-3   

220 V 230 V P kW 52

380 V 400 V P kW 90

660 V 690 V P kW 96

AC-4   

220 V 230 V P kW 20

380 V 400 V P kW 33

660 V 690 V P kW 48

Contact sequence  

Instructions   Contacts to EN 50 012.

integrated suppressor circuit in actuating electronics

Observe electrical lifespan.

Can be combined with auxiliary contact   DILM150-XHI(V)…

DILM1000-XHI(V)…

Actuating voltage   RDC 24: 24 - 27 V DC

Voltage AC/DC   DC operation

Connection to SmartWire-DT   no

Frame size   4

Technical data

General

Standards   IEC/EN 60947, VDE 0660, UL, CSA

06/18/2021 Eaton 107016 ED2021 V80.0 EN 1 / 12

Summary of content (12 pages)

PAGE 1
DATASHEET - DILM170(RDC24) Contactor, 3 pole, 380 V 400 V 90 kW, RDC 24: 24 - 27 V DC, DC operation, Screw terminals Delivery program Part no. Catalog No. Alternate Catalog No.
PAGE 2
Lifespan, mechanical DC operated Operations x 10 6 6.
PAGE 3
Tightening torque Nm 1.2 Pozidriv screwdriver Size 2 Standard screwdriver mm 0.8 x 5.
PAGE 4
380 V 400 V P kW 90 415 V P kW 100 440 V P kW 105 500 V P kW 120 660 V 690 V P kW 96 220 V 230 V Ie A 65 240 V Ie A 65 380 V 400 V Ie A 65 415 V Ie A 65 440 V Ie A 65 500 V Ie A 65 660 V 690 V Ie A 50 P kWh 220 V 230 V P kW 20 240 V P kW 22 380 V 400 V P kW 33 415 V P kW 39 440 V P kW 41 500 V P kW 47 660 V 690 V P kW 48 60 V Ie A 160 110 V Ie A 160 220 V Ie A 90 3 pole, at Ith (60°) W 48.
PAGE 5
Rating data for approved types Switching capacity Maximum motor rating Three-phase 200 V 208 V HP 50 230 V 240 V HP 60 460 V 480 V HP 125 575 V 600 V HP 125 115 V 120 V HP 10 230 V 240 V HP 30 A 225 Single-phase General use Short Circuit Current Rating SCCR Basic Rating SCCR kA 10 max. Fuse A 600 max. CB A 600 SCCR (fuse) kA 30/100 max. Fuse A 300/300 Class J SCCR (CB) kA 65 max. CB A 250 SCCR (fuse) kA 30/100 max.
PAGE 6
00V 60Hz 3phase HP 100 600V 60Hz 3phase A 99 Design veriﬁcation as per IEC/EN 61439 Technical data for design veriﬁcation Rated operational current for speciﬁed heat dissipation In A 170 Heat dissipation per pole, current-dependent Pvid W 13.7 Equipment heat dissipation, current-dependent Pvid W 41.1 Static heat dissipation, non-current-dependent Pvs W 1.9 Heat dissipation capacity Pdiss W 0 Operating ambient temperature min. °C -25 Operating ambient temperature max.
PAGE 7
Number of auxiliary contacts as normally closed contact 0 Type of electrical connection of main circuit Screw connection Number of normally closed contacts as main contact 0 Number of main contacts as normally open contact 3 Approvals Product Standards IEC/EN 60947-4-1; UL 60947-4-1; CSA - C22.2 No. 60947-4-1-14; CE marking UL File No. E29096 UL Category Control No. NLDX CSA File No. 012528 CSA Class No.
PAGE 8
3: Auxiliary contact modules on the side: 2 x DILM820-XHI11(V)-SI; 2 x DILM820-XHI11-SA Squirrel-cage motor Operating characteristics Starting:from rest Stopping:after attaining full running speed Electrical characteristics Make: up to 6 x rated motor current Break: up to 1 x rated motor current Utilization category 06/18/2021 Eaton 107016 ED2021 V80.
PAGE 9
100 % AC-3 Typical applications Compressors Lifts Mixers Pumps Escalators Agitators Fans Conveyor belts Centrifuges Hinged ﬂaps Bucket-elevators Air conditioning system General drives in manufacturing and processing machines Extreme switching duty Squirrel-cage motor Operating characteristics Inching, plugging, reversing Electrical characteristics Make: up to 6 x rated motor current Break: up to 6 x rated motor current Utilization category 100 % AC-4 Typical applications Printing presses Wire-drawing machi
PAGE 10
Switching conditions for non-motor consumers, 3 pole, 4 pole Operating characteristics Non inductive and slightly inductive loads Electrical characteristics Switch on: 1 x rated operational current Switch oﬀ: 1 x rated operational current Utilization category 100 % AC-1 Typical examples of application Electric heat 06/18/2021 Eaton 107016 ED2021 V80.
PAGE 11
Dimensions Contactor with auxiliary contact module 06/18/2021 Eaton 107016 ED2021 V80.
PAGE 12
distance at side to earthed parts: 10 mm DILM80…DILM170 DILMC80…DILMC150 DILMF80…DILMF150 06/18/2021 Eaton Industries GmbH http://www.eaton.eu © 06/2021 by Eaton Industries GmbH Eaton 107016 ED2021 V80.