Data Sheet

DATASHEET - BBA0-25
Busbar adapter, 45 mm, 25 A, DIN rail: 1
Part no. BBA0-25
Catalog No. 101451
Alternate Catalog
No.
BBA0-25
EL-Nummer
(Norway)
0002465046
Delivery program
Accessories   Busbar adapters
   For fitting to flat Cu-busbars with 60mm between busbar centres, suitable for 5 mm
and 10 mm busbar thickness
Rated operational current 25 A
For DOL Starter
For use with   Busbar adapter PKZ0, PKE
Rated operational voltage U
e
V 690
Rated operational current I
e
A 25
Terminal capacity   AWG 12
(4 mm²)
Adapter width  mm 45
Adapter length  mm 200
DIN rail  Quantity 1
Adapter width  mm 45
For use with   PKZM0, PKE + DILM7
PKZM0, PKE + DILM9
PKZM0, PKE + DILM12
PKZM0, PKE + DILM15
MSC-D(M)-0,25-M7… - MSC-D(M)-16-M15…
Notes Use in combination with individual components PKZM0, PKE, and DILM DOL set PKZM0‐XDM12.
Completely mounted and tested combination with MSC-D...
Design verification as per IEC/EN 61439
Technical data for design verification   
Rated operational current for specified heat dissipation I
n
A 25
Heat dissipation per pole, current-dependent P
vid
W 0
Equipment heat dissipation, current-dependent P
vid
W 1.9
Static heat dissipation, non-current-dependent P
vs
W 0
Heat dissipation capacity P
diss
W 0
Operating ambient temperature min.  °C -25
Operating ambient temperature max.  °C 55
IEC/EN 61439 design verification   
10.2 Strength of materials and parts   
10.2.2 Corrosion resistance   Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures   Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat   Meets the product standard's requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat
and fire due to internal electric effects
  Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation   Meets the product standard's requirements.
10.2.5 Lifting   Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact   Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions   Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES   Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances   Meets the product standard's requirements.
10.5 Protection against electric shock   Does not apply, since the entire switchgear needs to be evaluated.
06/18/2021 Eaton 101451 ED2021 V80.0 EN 1 / 3