Datasheet

EATON - WIRELESS SYSTEM
78
Functions overview for actuators in Comfort Mode (by means of MRF-Software and PC)
For each sensor assigned (max. 15 sensor per actuator) the following different functions can be selected:
Switching actuator functions that can be selected in Comfort Mode
ON / OFF (Standard in Basic-Mode)
Switches ON or OFF
ON / Switch-on delay time
Switch-on command which is carried out either immediately or after an adjustable delay time
OFF / Switch-off delay time
Switch-off command which is carried out either immediately or after an adjustable delay time
OFF with advance warning
Staircase light function that switches ON immediately and switches OFF after an adjustable delay time. 15 seconds before the
switching actuator switches OFF, the output unit will flash once as an advance warning.
Push-button function
The switching actuator switches ON only for the time the push-button is pressed; once it is released, il will switch OFF
Power impulse
The switching actuator changes its initial state every time it is activated
Flashing
Upon activation, the switching actuator starts flashing after an adjustable interval time
No function
As indicated
Functions available:
Delay time depending on each function: 0 seconds to 18 hours
Interval time of flashing: 2 seconds to 18 hours
Command time for a long push at the button: 1 to 5 seconds
Identification of the battery status (flashes upon switch-on)
Behaviour of the output unit when the power supply is restored
Other settings:
Dimming actuator functions that can be selected in Comfort Mode
ON / OFF / Dimming (Standard in Basic-Mode)
Switches ON, OFF or DIMS
ON / Switch-on delay time
Switch-on command which is carried out either immediately or after an adjustable delay time
OFF / Switch-off delay time
Switch-off command which is carried out either immediately or after an adjustable delay time
OFF with advance warning
Staircase light function that switches ON immediately and switches OFF after an adjustable delay time. 15 seconds fefore the
switching actuator switches OFF, the output unit will flash once as an advance warning.
Dimming function through push-button
The dimmer switches ON or OFF upon a short push at the button and will dim UP or DOWN upon a long push at the button.
Power impulse
The dimming actuator changes its initial state every time it is activated
Flashing, takes the dimming time into account
Upon activation, the dimming actuator starts flashing after an adjustable interval time while dimming at the same time
Brightness desired
The dimming actuator dims at the preset dimming speed (dimming time) towards a brightness value that has been preset
No functions
As indicated
Functions available:
Delay time depending on each function: 0 seconds to 18 hours
Interval time of flashing: 2 seconds to 18 hours
Command time for a long push at the button: 1 to 5 seconds
Dimming time: 0 to 250 seconds
Dimming limits: 0 to 100%
Identification of the battery status (flashing upon switch-on)
Behaviour of the output unit when the power supply is restored
Other settings: