Datasheet

EATON - WIRELESS SYSTEM
70
Setting in “BASIC MODE”
In “Basic Mode” the functions of the devices can be assigned through activating the programming button and the respective push-button.
Easy, without any complicated tools, PC or setting of DIP-switches etc.
Increasing the range through "Routing" (see Comfort Mode) is not possible in Basic Mode.
Install the actuator in the
flush box and connect it
Activate the programming
button (the red LED and the
connected lamp are
switched ON)
Push the corresponding
push-button (the red LED
and the connected lamps
flash twice for confirmation)
Activate the programming
button a second time to fin-
ish the process (the LED
and the connected lamp are
switched OFF)
Setting in “COMFORT MODE”
Comfort Mode offers the opportunity for detailed and comfortable settings (e.g. operating time of shutters, time functions, flash functions,
functions with command time, dimmer settings, settings for temperature sensors and much more).
All you need is a notebook/laptop. The free setting-software is easy to understand and clearly structured, so all the user has to do is to deal
with the setting jobs as such.
If the system was first programmed in "Basic Mode" and the push-buttons were assigned to certain actuators, the functional connections
are depicted as a single “line” when the system is read in. Detailed settings and adjustments can be made at any time ...
If no functions have been assigned yet, “Comfort Mode” enables you to assign a function by simply “drawing” a line between the actua-
tor(s) and the sensor(s) on the screen.
The devices can also be given names which are (and stay) memorized in the devices.
If one day the range should not be sufficient while taking the system into operation, the note-
book/laptop will automatically and in the background calculate the routing (forwarding of data
via actuators, for example).
1234
CLICK
CLICK
MRF 2.0 for Residential Buildings
MRF 2.0 for Light Commercial Buildings
Enhancements in the MRF2.0 version
• Modern and revised layout and design
• Code for professionals is generally unlocked
• Cancel and reset function
• Improved and faster reading of system pass words
• Improved reading and loading, shorter response times, re-naming while reading
• Reading of project parts, succession of reading/loading/quality of reception can be selec-
ted
• Adding of a background picture (bmp, jpg, gif, ...)
• Adding of project notes
• Adding of notes on each individual device
• Adding of grouping frames
• Enhanced documentation options
• Zoom function for large projects (50%, 100%)
• Enhanced selection mode for Copy/Delete/Shift
• Adding and configuration of virtual devices from a data base
• Easy connection assistant with an additional option for configuration
• Copying of projects and parts of projects
• "Manual" selection of routing
• Project topology for large projects - unambiguous project structure