Datasheet

EATON RF SYSTEM
59
Smoke Detector - Battery-Powered CSEZ-01/19
Technical Specifications
Power supply 9V via a 6LR61, 4022 9V, CP-V9J, U9VL-J,
GPCR-V9, U9VL-J-P
Sensor Photo-electronic smoke detector, power supplied by
battery (stray light sensor according to Tyndall effect)
Operating element Test button (activate for at least 1 second)
Alarm output Acoustic signal emitter, approx. 85dB at 3m
ATTENTION!!! Staying too close to the device when an acoustic alarm is triggered
might harm your hearing!
RF via adapter module and battery-powered binary
input (CBEU-02/02)
LED red LED as a display
Max. area covered approx. 60m
2
up to 6m high
Service life of the battery approx. 2 years (= battery service life)
depending on application and type of battery
Self-test approx. every 40 seconds
Signal
Degree of protection IP43
Degree of soiling 2
Operating temperature -10 to +60°C
Storage/transportation temp. -25 to +70°C
Colour of the enclosure similar to RAL9016
Dimensions of the enclosure HxWxD - 95 x 95 x 54mm
Approval Printed onto the device
0,2s
1s
40s
40s
3x
3x
Alarm+Memory
(1 Alarm / 24h)
10s
10s
10s
+
=
Mute
ALARM
TEST
0,2s
OK! 4
ALARM! 4
TEST! 4
Pollution!
Insert battery!
Mute mode in case
of an alarm!
1 alarm during the
past 24 h!
(e.g. when you
were out)