Datasheet

EATON RF SYSTEM
57
Water Leakage Sensor CSEZ-01/18
Technical Specifications
Power supply 9V via battery 6LR61
Sensor Detection of leakages, sensor is removable,
length of cable approx. 1.6m, NO threshold value
switch!!!
Alarm Acoustic signal emitter, approx. 85dB at 3m
ATTENTION!!! Staying too close to the device when an acoustic alarm is triggered
might harm your hearing!
Relay output potential-free, 1A/24VDC or 0.5A/125VAC
RF via binary input CBEU-02/02
Degree of protection IP20
Degree of soiling 2
Operating temperature 0 to +45°C
Storage/transportation temp. -25 to +60°C
Permitted relative air humidity max. 80%rF
Colour of the enclosure similar to RAL9010
Dimensions of the enclosure HxWxD - 100 x 62 x 35mm
Approval Printed onto the device
Humidity Sensor - Outdoor 0-10VDC with Temperature PT1000, CSEZ-01/17
Technical Specifications
Power supply 15-24VDC ±10%
Power consumption max. 2mA/24VDC
All connections Screw-type terminals, max. 1.5mm
2
Sensor 1 capacitive sensor, relative humidity
Operating range 0-100%
Measuring range 5-95% rel. humidity
Output voltage 0-10VDC
0% rel. humidity corresponding to 0VDC, 100% rel.
humidity corresponding to 10VDC
Accuracy at 24VDC and 21°C(+-5k) ±3% rel. humidity (in the range of 30-80% rel. hum.)
Load output min. 10kOhm
Long-term stability typ. +/-1% per year (depending on the environment)
Temperature drift typ. 0.05% rel. hum./°C at 20°C
Response time typ. 10s without filter
Sensor 2 PT1000
Temperature range -20 to + 60°C
Accuracy: DIN class B +/-0.3°C at 0°C
ATTENTION Make sure the setting on the CAEE-02/01 is correct.
Do not expose to direct sunlight.
Protect the sensor from pollution, clean filter on a
regular basis.
Degree of protection IP65
Operating temperature -20 to +60°C
Storage/transportation temp. -25 to +70°C
Colour of the enclosure similar to RAL9010
Dimensions of the enclosure HxWxD - 110 x 50 x 44mm
Approval Printed onto the device