Datasheet

EATON RF SYSTEM

Wiring Examples for Switching Actuator CSAU-01/03

e.g. lamps,

pumps,

fans,

sound signal

emitters

e.g. electric heat-

ing (heating con-

tactor)

e.g. electric

sauna

Switching fluorescent lamps with a CSAU-01/03 actuator

SA cycles Total capacitor value

37000 25µF

15000 55µF

7000 90µF

4000 107µF

2000 133µF

The numbers of SA cycles specified are approximate values and may vary depending on the local conditions prevailing in each case. The

total capacitor value is the sum of the individual capacitor values according to the type and number of fluorescent lamps compensated in

parallel (see table below). The max. load current of the actuator must not be exceeded. The max. number of cycles selected depends on the

type of application and hence determines the number of fluorescent lamps to be switched via an actuator.

Lamp capacity Capacitor / Compensation in parallel

4-13W 2uF

15-40W 4,5uF

58W 7uF

The above mentioned values are given by the manufacturers of fluorescent lamps and ballasts. Subject to changes without guarantee.