Data Sheet

Screw terminals   
Solid 
mm
2
1 x (1 - 6)
2 x (1 - 6)
Flexible with ferrule to DIN 46228 
mm
2
1 x (1 - 6)
2 x (1 - 6)
Solid or stranded  AWG 18 - 10
Stripping length  mm 10
Specified tightening torque for terminal screws   
Main cable  Nm 1.7
Control circuit cables  Nm 1
Main conducting paths
Rated impulse withstand voltage U
imp
V AC 6000
Overvoltage category/pollution degree   III/3
Rated operational voltage U
e
V AC 690
Rated uninterrupted current = rated operational current I
u
= I
e
A 16
Rated frequency f Hz 40 - 60
Current heat loss (3 pole at operating temperature)  W 6
Lifespan, mechanical Operations
x 10
6
0.1
Lifespan, electrical (AC-3 at 400 V)   
Lifespan, electrical Operations
x 10
6
0.1
Max. operating frequency  Ops/h 40
Short-circuit rating   
DC   
Short-circuit rating  kA 60
Motor switching capacity   
AC-3 (up to 690V)  A 16
DC-5 (up to 250V)  A 16 (3 contacts in series)
Trip blocks
Temperature compensation   
to IEC/EN 60947, VDE 0660  °C - 5 … 40
Operating range  °C - 25 … 55
Temperature compensation residual error for T > 40 °C   ≦ 0.25 %/K
Setting range of overload releases  x I
u
0.6 - 1
short-circuit release   Basic device, fixed: 20 x I
u
Short-circuit release tolerance   ± 20%
Phase-failure sensitivity   IEC/EN 60947-4-1, VDE 0660 Part 102
Design verification as per IEC/EN 61439
Technical data for design verification   
Rated operational current for specified heat dissipation I
n
A 16
Heat dissipation per pole, current-dependent P
vid
W 2
Equipment heat dissipation, current-dependent P
vid
W 6
Static heat dissipation, non-current-dependent P
vs
W 0
Heat dissipation capacity P
diss
W 0
Operating ambient temperature min.  °C -25
Operating ambient temperature max.  °C 55
IEC/EN 61439 design verification   
10.2 Strength of materials and parts   
10.2.2 Corrosion resistance   Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures   Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat   Meets the product standard's requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat
and fire due to internal electric effects
  Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation   Meets the product standard's requirements.
10.2.5 Lifting   Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact   Does not apply, since the entire switchgear needs to be evaluated.
06/18/2021 Eaton 088917 ED2021 V80.0 EN 2 / 9