Data Sheet

DC-13 L/R - 100 ms   
24 V I
e
A 2
60 V I
e
A 1
110 V I
e
A 0.5
220 V I
e
A 0.25
Lifespan  S 
Lifespan, mechanical Operations
x 10
6
> 0.1
Lifespan, electrical Operations
x 10
6
0.05
Control circuit reliability Failure rate λ
<10
-8
, < one failure at 100 million operations
(at U
e
= 24 V DC, U
min
= 17 V, I
min
= 5.4 mA)
interlocked opposing contacts   yes
Short-circuit rating without welding   
Fuseless  Type FAZ-B4/1-HI
Fuse  A gG/gL 10
Terminal capacities
Solid or flexible conductor, with ferrule 
mm
2
0,75 - 2,5
Solid or stranded  AWG 18 - 14
Rating data for approved types
Pilot Duty   
AC operated   A600
DC operated   Q300
General Use   
AC  V 600
AC  A 5
DC  V 250
DC  A 1
Design verification as per IEC/EN 61439
Technical data for design verification   
Rated operational current for specified heat dissipation I
n
A 3.5
Heat dissipation per pole, current-dependent P
vid
W 0.04
Equipment heat dissipation, current-dependent P
vid
W 0
Static heat dissipation, non-current-dependent P
vs
W 0
Heat dissipation capacity P
diss
W 0
Operating ambient temperature min.  °C -25
Operating ambient temperature max.  °C 55
IEC/EN 61439 design verification   
10.2 Strength of materials and parts   
10.2.2 Corrosion resistance   Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures   Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat   Meets the product standard's requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat
and fire due to internal electric effects
  Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation   Meets the product standard's requirements.
10.2.5 Lifting   Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact   Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions   Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES   Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances   Meets the product standard's requirements.
10.5 Protection against electric shock   Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components   Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections   Is the panel builder's responsibility.
10.8 Connections for external conductors   Is the panel builder's responsibility.
10.9 Insulation properties   
10.9.2 Power-frequency electric strength   Is the panel builder's responsibility.
06/18/2021 Eaton 072896 ED2021 V80.0 EN 2 / 5