Data Sheet

Conv. thermal current I
th
A 6
Short-circuit rating without welding   
Note   When supplied directly from mains or transformer > 1000 VA
Max. fuse, make contacts  A gG/gL 6
Max. fuse, break contacts  A gG/gL 6
Max. overcurrent protective device, 220/230 V  Type FAZ-B4/1-HI
Magnet systems
Power consumption   
Pick-up AC  VA 2
Sealing AC  VA 2
Pick-up DC  W 1.8
Sealing DC  W 1.8
Duty factor  % DF 100
Maximum operating frequency  Ops/h 4000
Minimum command time   
AC  ms 50
DC  ms 30
Repetition accuracy (deviation)  % ≦ 0.5
Recovery time (after 100% time delay)  ms 70
Contact changeover time t
u
ms 4
Electromagnetic compatibility (EMC)
Electrostatic discharge (ESD)   
applied standard   IEC/EN 61000-4-2
Air discharge  kV 8
Contact discharge  kV 6
Electromagnetic fields (RFI)   
applied standard   IEC/EN 61000-4-3
  V/m 80 - 1000 MHz: 10
1.4 - 2 GHz: 3
2.0 - 2.7 GHz: 1
Radio interference suppression   EN 55011, Class B (conducted)
EN 55011, Class B (radiated)
Burst  kV Supply cables: 2
Signal cables: 1
according to IEC/EN 61000-4-4
power pulses (Surge)   2 kV (symmetrical)
4 kV (asymmetrical)
according to IEC/EN 61000-4-5
Immunity to line-conducted interference to (IEC/EN 61000-4-6)  V 10
Design verification as per IEC/EN 61439
Technical data for design verification   
Rated operational current for specified heat dissipation I
n
A 6
Heat dissipation per pole, current-dependent P
vid
W 1.4
Equipment heat dissipation, current-dependent P
vid
W 0
Static heat dissipation, non-current-dependent P
vs
W 1.8
Heat dissipation capacity P
diss
W 0
Operating ambient temperature min.  °C -25
Operating ambient temperature max.  °C 60
IEC/EN 61439 design verification   
10.2 Strength of materials and parts   
10.2.2 Corrosion resistance   Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures   Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat   Meets the product standard's requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat
and fire due to internal electric effects
  Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation   Meets the product standard's requirements.
10.2.5 Lifting   Does not apply, since the entire switchgear needs to be evaluated.
06/16/2021 Eaton 031891 ED2021 V80.0 EN 3 / 9