Data Sheet

ManualsBrandsEaton ManualsActuatorsEaton T3-2-8296/Z Changeover switch 1 pc(s)

DATASHEET - T3-2-8296/Z

Changeoverswitches, T3, 32 A, rear mounting, 2 contact unit(s), Contacts:

4, 45 °, momentary, Without 0 (Oﬀ) position, With spring-return to 1, 1<2,

Design number 8296

Part no. T3-2-8296/Z

Catalog No. 018476



Similar to illustration

Delivery program

Product range   Control switches

Part group reference   T3

Basic function   Changeoverswitches

   with black thumb grip and front plate

Contacts   4

Degree of Protection   Front IP65

Design   rear mounting

  

Contact sequence  

Switching angle  ° 45

Switching performance   momentary

Without 0 (Oﬀ) position

With spring-return to 1

Design number   8296

Front plate no.  

front plate   1<2

Motor rating AC-23A, 50 - 60 Hz

  

400 V P kW 15

Rated uninterrupted current I

A 32

Note on rated uninterrupted current !

  Rated uninterrupted current I

is speciﬁed for max. cross-section.

Number of contact units  contact

unit(s)

Technical data

General

Standards   IEC/EN 60947, VDE 0660, IEC/EN 60204, CSA, UL

01/09/2020 Eaton 018476 ED2019 V63.0 EN 1 / 6

Summary of content (6 pages)

PAGE 1
DATASHEET - T3-2-8296/Z Changeoverswitches, T3, 32 A, rear mounting, 2 contact unit(s), Contacts: 4, 45 °, momentary, Without 0 (Oﬀ) position, With spring-return to 1, 1<2, Design number 8296 Part no. Catalog No.
PAGE 2
Switch-disconnector according to IEC/EN 60947-3 Climatic prooﬁng Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30 Ambient temperature Open °C -25 - +50 Enclosed °C -25 - +40 Overvoltage category/pollution degree Rated impulse withstand voltage III/3 Uimp Mechanical shock resistance V AC 6000 g 15 Mounting position As required Contacts Electrical characteristics Rated operational voltage Ue V AC 690 Rated uninterrupted current Iu A 32 Note on rated uninter
PAGE 3
690 V Ie A 14.7 690 V star-delta Ie A 25.5 Ie A 32 AC-21A Rated operational current switch 440 V AC-23A Motor rating AC-23A, 50 - 60 Hz P kW 230 V P kW 7.5 400 V 415 V P kW 15 500 V P kW 15 690 V P kW 15 230 V Ie A 32 400 V 415 V Ie A 32 500 V Ie A 26.
PAGE 4
Rated uninterrupted current max. Main conducting paths General use A 25 A 10 Auxiliary contacts General Use IU Pilot Duty A 600 Switching capacity Maximum motor rating Single-phase 120 V AC HP 1.5 200 V AC HP 3 240 V AC HP 3 200 V AC HP 3 240 V AC HP 3 480 V AC HP 7.5 600 V AC HP 10 Three-phase Short Circuit Current Rating SCCR Basic Rating kA 5 max. Fuse A 40 High fault rating kA 10 max.
PAGE 5
10.9.3 Impulse withstand voltage Is the panel builder's responsibility. 10.9.4 Testing of enclosures made of insulating material Is the panel builder's responsibility. 10.10 Temperature rise The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. 10.11 Short-circuit rating Is the panel builder's responsibility. The speciﬁcations for the switchgear must be observed. 10.
PAGE 6
Dimensions ① Shaft extension with ZAV-T0 possible, max. 4 x 25 = 100 mm ② ZFS-... Label mount not included as standard ③ Drilling dimensions base ④ Drilling dimensions door Assets (links) Declaration of CE Conformity 00003074 Instruction Leaﬂets IL03801021Z2018_05 01/09/2020 Eaton Industries GmbH http://www.eaton.eu © 12/2019 by Eaton Industries GmbH Eaton 018476 ED2019 V63.