Data Sheet

ManualsBrandsEaton ManualsActuatorsT0-4-15374/E Changeover switch 1 pc(s)

DATASHEET - T0-4-15374/E

Changeoverswitches, T0, 20 A, ﬂush mounting, 4 contact unit(s), Contacts:

8, 45 °, momentary, With 0 (Oﬀ) position, with spring-return from both

directions to 0, 2>0<1, design no. 15374

Part no. T0-4-15374/E

Catalog No. 013713



Similar to illustration

Delivery program

Product range   Control switches

Part group reference   T0

Basic function   Changeoverswitches

   with black thumb grip and front plate

Contacts   8

Degree of Protection   Front IP65

Design   ﬂush mounting

  

Contact sequence  

Switching angle  ° 45

Switching performance   momentary

With 0 (Oﬀ) position

with spring-return from both directions to 0

Design number   15374

Front plate no.  

front plate   2>0<1

Motor rating AC-23A, 50 - 60 Hz

  

400 V P kW 5.5

Rated uninterrupted current I

A 20

Note on rated uninterrupted current !

  Rated uninterrupted current I

is speciﬁed for max. cross-section.

06/18/2021 Eaton 013713 ED2021 V80.0 EN 1 / 6

Summary of content (6 pages)

PAGE 1
DATASHEET - T0-4-15374/E Changeoverswitches, T0, 20 A, ﬂush mounting, 4 contact unit(s), Contacts: 8, 45 °, momentary, With 0 (Oﬀ) position, with spring-return from both directions to 0, 2>0<1, design no. 15374 Part no. Catalog No.
PAGE 2
Number of contact units contact 4 unit(s) Technical data General Standards IEC/EN 60947, VDE 0660, IEC/EN 60204, CSA, UL Switch-disconnector according to IEC/EN 60947-3 Climatic prooﬁng Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30 Ambient temperature Open °C -25 - +50 Enclosed °C -25 - +40 Overvoltage category/pollution degree Rated impulse withstand voltage III/3 Uimp Mechanical shock resistance V AC 6000 g 15 Mounting position As required Contacts Elec
PAGE 3
230 V star-delta Ie A 20 400V 415 V Ie A 11.5 400 V star-delta Ie A 20 500 V Ie A 9 500 V star-delta Ie A 15.6 690 V Ie A 4.9 690 V star-delta Ie A 8.5 AC-23A Motor rating AC-23A, 50 - 60 Hz P kW 230 V P kW 3 400 V 415 V P kW 5.5 500 V P kW 7.5 690 V P kW 5.5 230 V Ie A 13.3 400 V 415 V Ie A 13.3 500 V Ie A 13.3 690 V Ie A 7.
PAGE 4
Rating data for approved types Contacts Rated operational voltage Ue V AC 600 A 16 A 10 Rated uninterrupted current max. Main conducting paths General use Auxiliary contacts General Use IU Pilot Duty A 600 P 300 Switching capacity Maximum motor rating Single-phase 120 V AC HP 0.5 200 V AC HP 1 240 V AC HP 1.5 200 V AC HP 3 240 V AC HP 3 480 V AC HP 7.5 600 V AC HP 7.5 Three-phase Short Circuit Current Rating SCCR Basic Rating kA 5 max.
PAGE 5
10.8 Connections for external conductors Is the panel builder's responsibility. 10.9 Insulation properties 10.9.2 Power-frequency electric strength Is the panel builder's responsibility. 10.9.3 Impulse withstand voltage Is the panel builder's responsibility. 10.9.4 Testing of enclosures made of insulating material Is the panel builder's responsibility. 10.10 Temperature rise The panel builder is responsible for the temperature rise calculation.
PAGE 6
Dimensions ② ZFS-... Label mount not included as standard 06/18/2021 Eaton Industries GmbH http://www.eaton.eu © 06/2021 by Eaton Industries GmbH Eaton 013713 ED2021 V80.