Data Sheet

DC-1, Load-break switches L/R = 1 ms   
Rated operational current I
e
A 10
Voltage per contact pair in series  V 60
DC-21A I
e
A 
Rated operational current I
e
A 1
Contacts  Quantity 1
DC-23A, motor load switch L/R = 15 ms   
24 V   
Rated operational current I
e
A 10
Contacts  Quantity 1
48 V   
Rated operational current I
e
A 10
Contacts  Quantity 2
60 V   
Rated operational current I
e
A 10
Contacts  Quantity 3
120 V   
Rated operational current I
e
A 5
Contacts  Quantity 3
240 V   
Rated operational current I
e
A 5
Contacts  Quantity 5
DC-13, Control switches L/R = 50 ms   
Rated operational current I
e
A 10
Voltage per contact pair in series  V 32
Control circuit reliability at 24 V DC, 10 mA Fault
probability
H
F
< 10
-5
, < 1 fault in 100000 operations
Terminal capacities
Solid or stranded 
mm
2
1 x (1 - 2,5)
2 x (1 - 2,5)
Flexible with ferrules to DIN 46228 
mm
2
1 x (0.75 - 2.5)
2 x (0.75 - 2.5)
Terminal screw   M3.5
Tightening torque for terminal screw  Nm 1
Technical safety parameters:
Notes   B10
d
values as per EN ISO 13849-1, table C1
Rating data for approved types
Terminal capacity   
Terminal screw   M3.5
Design verification as per IEC/EN 61439
Technical data for design verification   
Rated operational current for specified heat dissipation I
n
A 20
Heat dissipation per pole, current-dependent P
vid
W 0.6
Equipment heat dissipation, current-dependent P
vid
W 0
Static heat dissipation, non-current-dependent P
vs
W 0
Heat dissipation capacity P
diss
W 0
Operating ambient temperature min.  °C -25
Operating ambient temperature max.  °C 50
IEC/EN 61439 design verification   
10.2 Strength of materials and parts   
10.2.2 Corrosion resistance   Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures   Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat   Meets the product standard's requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat
and fire due to internal electric effects
  Meets the product standard's requirements.
01/09/2020 Eaton 013696 ED2019 V63.0 EN 3 / 4