Data Sheet

ManualsBrandsEaton ManualsCircuit BreakersEaton T0-2-8260/XZ Uniselector 20 690 V 1 pc(s)

DATASHEET - T0-2-8260/XZ

Step switch, 2p, Ie=12A, FS 0-2, 45°, maintained, 48x48 mm, rear mounting

Part no. T0-2-8260/XZ

Catalog No. 011765



EL-Nummer

(Norway)

0001456694

Similar to illustration

Delivery program

Product range   Control switches

Part group reference   T0

Contacts   4

Design   rear mounting

Basic switch

Contact sequence  

Switching angle  ° 45

Design number   8260

Front plate no.  

Motor rating AC-23A, 50 - 60 Hz

  

400 V P kW 5.5

Rated uninterrupted current I

A 20

Note on rated uninterrupted current !

  Rated uninterrupted current I

is speciﬁed for max. cross-section.

Number of contact units  contact

unit(s)

Technical data

General

Standards   IEC/EN 60947, VDE 0660, IEC/EN 60204

Switch-disconnector according to IEC/EN 60947-3

Climatic prooﬁng   Damp heat, constant, to IEC 60068-2-78

Damp heat, cyclic, to IEC 60068-2-30

Ambient temperature   

Open  °C -25 - +50

Enclosed  °C -25 - +40

Overvoltage category/pollution degree   III/3

Rated impulse withstand voltage U

imp

V AC 6000

Mechanical shock resistance  g 15

Mounting position   As required

Contacts

Electrical characteristics   

Rated operational voltage U

V AC 690

Rated uninterrupted current I

A 20

Note on rated uninterrupted current !

  Rated uninterrupted current I

is speciﬁed for max. cross-section.

Load rating with intermittent operation, class 12   

AB 25 % DF  x I

01/09/2020 Eaton 011765 ED2019 V63.0 EN 1 / 4

Summary of content (4 pages)

PAGE 1
DATASHEET - T0-2-8260/XZ Step switch, 2p, Ie=12A, FS 0-2, 45°, maintained, 48x48 mm, rear mounting Similar to illustration Part no. Catalog No. T0-2-8260/XZ 011765 EL-Nummer (Norway) 0001456694 Delivery program Product range Control switches Part group reference T0 Contacts 4 Design rear mounting Basic switch Contact sequence Switching angle ° Design number 45 8260 Front plate no. Motor rating AC-23A, 50 - 60 Hz 400 V Rated uninterrupted current P kW 5.
PAGE 2
AB 40 % DF x Ie 1.6 AB 60 % DF x Ie 1.
PAGE 3
DC DC-1, Load-break switches L/R = 1 ms Rated operational current Ie Voltage per contact pair in series DC-21A Rated operational current A 10 V 60 Ie A Ie A Contacts 1 Quantity 1 DC-23A, motor load switch L/R = 15 ms 24 V Rated operational current Ie Contacts A 10 Quantity 1 48 V Rated operational current Ie Contacts A 10 Quantity 2 60 V Rated operational current Ie Contacts A 10 Quantity 3 120 V Rated operational current Ie Contacts A 5 Quantity 3 240 V Rated operation
PAGE 4
10.2.3.3 Veriﬁcation of resistance of insulating materials to abnormal heat and ﬁre due to internal electric eﬀects Meets the product standard's requirements. 10.2.4 Resistance to ultra-violet (UV) radiation UV resistance only in connection with protective shield. 10.2.5 Lifting Does not apply, since the entire switchgear needs to be evaluated. 10.2.6 Mechanical impact Does not apply, since the entire switchgear needs to be evaluated. 10.2.7 Inscriptions Meets the product standard's requirements.