Data Sheet

ManualsBrandsEaton ManualsActuatorsT0-2-15474/E On/Off switch 1 pc(s)

DATASHEET - T0-2-15474/E

ON-OFF switches, T0, 20 A, ﬂush mounting, 2 contact unit(s), Contacts: 4,

90 °, maintained, 0-1, design no. 15474

Part no. T0-2-15474/E

Catalog No. 011423



Similar to illustration

Delivery program

Product range   Control switches

Part group reference   T0

Basic function   ON-OFF switches

   with black thumb grip and front plate

Contacts   4

Degree of Protection   Front IP65

Design   ﬂush mounting

  

Contact sequence  

Switching angle  ° 90

Switching performance   maintained

Design number   15474

Front plate no.  

front plate   0-1

Motor rating AC-23A, 50 - 60 Hz

  

400 V P kW 5.5

Rated uninterrupted current I

A 20

Note on rated uninterrupted current !

  Rated uninterrupted current I

is speciﬁed for max. cross-section.

Number of contact units  contact

unit(s)

06/16/2021 Eaton 011423 ED2021 V80.0 EN 1 / 6

Summary of content (6 pages)

PAGE 1
DATASHEET - T0-2-15474/E ON-OFF switches, T0, 20 A, ﬂush mounting, 2 contact unit(s), Contacts: 4, 90 °, maintained, 0-1, design no. 15474 Part no. Catalog No.
PAGE 2
Technical data General Standards IEC/EN 60947, VDE 0660, IEC/EN 60204, CSA, UL Switch-disconnector according to IEC/EN 60947-3 Climatic prooﬁng Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30 Ambient temperature Open °C -25 - +50 Enclosed °C -25 - +40 Overvoltage category/pollution degree Rated impulse withstand voltage III/3 Uimp Mechanical shock resistance V AC 6000 g 15 Mounting position As required Contacts Electrical characteristics Rated operational vol
PAGE 3
400 V star-delta Ie A 20 500 V Ie A 9 500 V star-delta Ie A 15.6 690 V Ie A 4.9 690 V star-delta Ie A 8.5 P kW 230 V P kW 3 400 V 415 V P kW 5.5 500 V P kW 7.5 690 V P kW 5.5 230 V Ie A 13.3 400 V 415 V Ie A 13.3 500 V Ie A 13.3 690 V Ie A 7.
PAGE 4
Rated uninterrupted current max. Main conducting paths General use A 16 A 10 Auxiliary contacts General Use IU Pilot Duty A 600 P 300 Switching capacity Maximum motor rating Single-phase 120 V AC HP 0.5 200 V AC HP 1 240 V AC HP 1.5 200 V AC HP 3 240 V AC HP 3 480 V AC HP 7.5 600 V AC HP 7.5 Three-phase Short Circuit Current Rating SCCR Basic Rating kA 5 max. Fuse A 50 High fault rating kA 10 max.
PAGE 5
10.9.3 Impulse withstand voltage Is the panel builder's responsibility. 10.9.4 Testing of enclosures made of insulating material Is the panel builder's responsibility. 10.10 Temperature rise The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. 10.11 Short-circuit rating Is the panel builder's responsibility. The speciﬁcations for the switchgear must be observed. 10.