User's Guide
Table Of Contents
- EkaNet™ Hardware Manual
- Table of Contents
- List of Figures
- 1. Introduction
- 2. ECR-2400 Node Hardware
- 3. Elster A3/Alpha Plus Node Hardware
- 4. RESI-MON Node Hardware
- 5. Gateway Hardware
Gateway Hardware
EkaNet Hardware Manual 5 - 6 10156-04
Eka Proprietary and Confidential
5.4 Installing an Indoor Gateway
Your EkaNet Gateway suitable for indoor installation will be enclosed in a plastic
housing as shown in Figure 5.5.
To install an indoor gateway:
1. Attach your ethernet cable to the LAN connection on the gateway.
This housing is not suitable for outdoor installation.
Figure 5.5 Indoor Gateway
LAN connection