User's Manual

Introduction
EkaNet Hardware Manual 1 - 2 10156-07
Eka Proprietary and Confidential
1.2 Supporting Documents
The following documents contain supporting details on the operation of your
EkaNet wireless mesh network:
• EkaNet System Description — describes the system features of
EkaNet’s wireless mesh network for embedded device networking
applications
• EkaNet Operations Manual — describes the procedures to plan,
deploy, and maintain your EkaNet wireless mesh network
• EkaNet Field Tool User Manual — describes the features and use of
the EkaNet Field tools
• Network Manager User Guide — describes the use of the Network
Manager software. Includes sizing, installation, and administration
information.
1.3 Version History
Revision
Number
Date Released Comment
01 September 2005 Initial Version - 10156
02 March 2006 Added RESI-MON Node (See “RESI-MON
Node Hardware” on page 4 - 1), Elster Node
(See “Elster A3/Alpha Plus Node Hardware” on
page 3 - 1) sections.
03 May 2006 Updated Gateway section with instructions on
gateway configuration (See “Configuring the
Gateway Using the Field Tool” on page 6 - 1).
04 July 2006 Updated Radio Specifications (See “Radio
Specifications” on page 2-6.) Added FCC
Warning (See “Warning” on page 4-1.)
05 August 2006
• Updated Radio Specifications for ECR-2400
Node Hardware (See “Radio Specifications”
on page 2-6.)
• Updated Radio Specifications for Elster A3/
Alpha Plus Node Hardware (See “Radio
Specifications” on page 3-7.)
• Updated Radio Specifications for RESI-MON
Hardware (See “Radio Specifications” on
page 4-5.)
06 October 2006
• Added EkaNet Pulse Node section (See
“EkaNet Pulse Node Hardware” on page 5-1.)
07 January 2007
• Added instructions on RF exposure
compliance