User's Manual
Table Of Contents
- EkaNet™ Hardware Manual
- Table of Contents
- List of Figures
- 1. Introduction
- 2. ECR-2400 Node Hardware
- 3. Elster A3/Alpha Plus Node Hardware
- 4. RESI-MON Node Hardware
- 5. EkaNet Pulse Node Hardware
- 6. Gateway Hardware
10156-07 1 - 1 EkaNet Hardware Manual
Eka Proprietary and Confidential
EkaNet
™
Hardware Manual
This document describes the node and gateway hardware
components of an EkaNet wireless mesh network
1. Introduction
1.1 Overview
1.1.1 Product Highlights
EkaNet’s wireless mesh network consists of multiple nodes communicating via
a gateway with a server through either an IP connection or phone modem. In
this self-configuring, peer-to-peer, multi-hop network, data is intelligently routed
between nodes and gateways in the most efficient manner. Figure 1.1 shows
the components of an EkaNet wireless mesh network including those supplied
by the customer. This document describes the node and gateway hardware that
make up the EkaNet wireless mesh network.
Figure 1.1 The Architecture of the EkaNet Wireless Mesh Network System