User's Manual

Gateway Hardware
10156-07 6 - 3 EkaNet Hardware Manual
Eka Proprietary and Confidential
6.2.2 User Config Settings
To modify a user, select the UserID from the drop-down list and make the
necessary changes.
To create a new user:
1. Type the new User Id in the UserID text area
2. Select the Access Level from the drop-down list
3. Complete the Password
4. Reenter the password
5. Tap the Save button.
Figure 6.2 Gateway Maintenance User Configuration
Select User Config as the Config Type
to modify User settings.
Select Reset to restore the user
settings.
Select Save to save the user settings to
the compact flash card.
You may create multiple users before hitting the Save button.
On the Configuration screens, labels will change to a red font when changes
are made to the associated values.