User's Manual

EkaNet Pulse Node Hardware
EkaNet Hardware Manual 5 - 5 10156-07
Eka Proprietary and Confidential
5.3 EkaNet Outdoor Pulse Nodes
5.3.1 Layout
Figure 5.3 is a diagram of a EkaNet Pulse node used for an outdoor installation.
The primary components of the node are:
• the pulse interface connector - connects the node to the meter
• the node’s serial number - the node’s unique identifier
• LEDs - red and green lights displaying node’s operating status
Figure 5.3 Layout of EkaNet Pulse Node for Outdoor Installations
Power Supply Board
AC Connection
(Ends loose)
White (AC Neutral )
Black (AC Line)
Pulse Connections
Red (+6 to +12VDC)
Black (GND)
Bar code and label
contain the node’s radio
address and serial
number . These numbers
are also embedded in
the node’s software .
LED Status Lights
Eka Pulse Board
Common 1&2 Common 3&4 Channel 1 Channel 2 Channel 3 Channel 4
Unused
GND +6 to +12VDC