User's Manual

EkaNet Pulse Node Hardware
EkaNet Hardware Manual 5 - 3 10156-07
Eka Proprietary and Confidential
5.2 EkaNet Indoor Pulse Nodes
5.2.1 Layout
Figure 5.1 is a diagram of a EkaNet Pulse node used for an indoor installation.
The primary components of the node are:
• the pulse interface connector - connects the node to the meter
• the node’s serial number - the node’s unique identifier
• LEDs - red and green lights displaying node’s operating status
Figure 5.1 Layout of EkaNet Pulse Node for Indoor Installations
Bar code and label
contain the node’s radio
address and serial
number . These numbers
are also embedded in
the node’s software .
Mounting holes (4)
LED Status Lights
Channel 1 Channel 2 Channel 3 Channel 4 Common 1&2 Common 3&4
Pulse Connections
Unused
+6 to +12VDC GND
Eka Pulse Board