User's Manual
Table Of Contents
- EkaNet™ Hardware Manual
- Table of Contents
- List of Figures
- 1. Introduction
- 2. ECR-2400 Node Hardware
- 3. Elster A3/Alpha Plus Node Hardware
- 4. RESI-MON Node Hardware
- 5. EkaNet Pulse Node Hardware
- 6. Gateway Hardware
ECR-2400 Node Hardware
EkaNet Hardware Manual 2 - 3 10156-07
Eka Proprietary and Confidential
2.1 Overview
The ECR-2400 node is an under-the-glass board designed for installation in an
ECR-2400 meter. The node plugs into the meter and provides an easy and
reliable way to enable meters to automatically form a wireless mesh network.
This section describes the procedures to integrate an ECR-2400 node with a
ECR-2400 meter.
2.1.1 ECR-2400 Node Features
ECR-2400 nodes:
• operate in the 2.4 GHz band
• fit “under the glass”
• performs automatic time synchronization
• provide real-time access to interval data
• contain local non-volatile data storage
• provide full wireless routing capability
Figure 2.1 ECR-2400 Node
00140800001C
1400000018
FCC ID P9X2400b