Specification Sheet

Portfolio
MOUNTING ACCESSORIES
Catalog #
Type
Date
Project
Comments
Prepared by
TD520067EN
2017-03-21 11:57:26
Mounting Accessories
and options
A
B
FIGURE 1.
FIGURE 2.
FIGURE 3.
SLOPE ADAPTORS
HSA-4 = 4”
HSA-6 = 6”
HSA-8 = 8”
Slope adapters for use with recessed fixtures. .050 spun aluminum,
matte white finish. Available in 5º, 10º, 15º, 20º, 25º, 30º, 35º 40º and
45º slopes. Add slope desired after catalog number (e.g.) HSA-5-20)
(Figure 1.).
SLOPE ADAPTORS
HB26 = Pre sized for 24” on center ceiling grids. End of bar folds
over to lock bar onto grid without interference from adjacent tile.
Can also be used with 16” O.C. grids. Recommended for use in
seismic areas. For use with any recessed fixture with universal
mounting bracket (Figure 2.).
WOOD JOIST BAR HANGERS
RMB-22 = 22” long (2 per set).
For Mounting almost any Portfolio housing in wood joists up to 24”
(Figure 3.).
1-1/2”X 50” C-CHANNEL BAR HANGERS
HB50 = 50” long (2 per set) For use with any recessed fixture with
universal mounting brackets (Figure 4.)
“A”= Location of plaster ground “B”= Ceiling opening
HSA-4= 4-1/6”(103mm) HSA-4=10-3/8”(264mm)
HSA-6= 4-5/16”(110mm) HAS-6=11-5/8”(295mm)
HSAC-6= 4-1/8”(105mm) HSAC-6=11-5/8”(295mm)
HSA-8= 5-11/16”(144mm) HSA-8=15-3/4”(400mm)