Specification Sheet

Specifications and dimensions subject to change without notice.
Consult your representative for additional options and finishes.
Portfolio
SPECIFICATION FEATURES
Optical Reflector
Clear upper Alzak® reflector for
maximum light output. Positive
reflector mounting, without tools,
pulls trim tight to ceiling. Lower
spun parabolic reflector, .050 thick
aluminum available in a varitey of
Alzak® finishes.
Lens
Choice of tempered fresnel,
prismatic, diffuse, or clear glass
lenses or molded prismatic acrylic,
opal diffuser, or clear UV stabilized
acrylic.
Mechanical Housing
Mounting Frame
One piece precision die cast
aluminum 1-1/2" deep collar
accommodates varying dimensions
of ceiling materials.
Universal Mounting Bracket
Accepts 1/2" EMT, C Channel, T bar
fasteners, and bar hangers. Adjusts
5" vertically from above or below
ceiling.
Conduit Fittings
Die cast screw tight connectors.
Junction Box
Listed for eight #12AWG (four in,
four out) 90°C conductors feed
through branch wiring. 1/2" and
two 3/4" pry outs. Positioned to
allow straight conduit runs. Access
to junction box by removing
reflector.
Trim Ring Options
Self flanged or molded white trim
ring. Rimless trim ring accessory
available.
Socket Cap
One piece vented and finned die
cast aluminum cap for maximum
thermal performance.
Socket
4-pin GX24q3/4 fatigue free
stainless steel lamp spring ensures
positive lamp retention.
Electronic Ballast with
Quick Disconnect
Electronic ballast provides full
light output and rated lamp life.
Provides flicker free and noise free
operation and starting. End of lamp
life protection is standard.
Labels
cULus listed, standard wet label.
Electronic ballast housings include
peel down wattage label from 42W
down to 26W allowing de-rating to
meet max wattage requirements.
Meets IECC, ASHRAE,and Title 24
commercial standards.
CD6013
CD6018
CD6042
6CLV142W
13W or 18W TTT
26/32/42W TTT or PLT
Compact Fluorescent
STEPREPEAT>
6-Inch Vertical
Wide Beam Lens Downlight
High efficiency, low brightness 6-inch aperture wide beam reflector for
use with compact fluorescent lamps. The precisely formed non-imaging
optical reflector ensures 60° cutoff to lens and lens image and the one
piece design eliminates light leaks at the ceiling. Adjustable socket
locks lamp into optimal position and cannot be disturbed by normal
maintenance. Standard features include low iridescent finish on all
reflector colors and venting to ensure maximum lamp life and lumen
output. Optics offer unparalleled performance in glare free lighting with a
smooth beam devoid of hot spots. Medium beam, wide beam, lensed, and
open wall wash reflectors are interchangeable within the same housing.
DESCRIPTION
Ø 6-3/8" [162mm]
Ø 7-1/4" [184mm]
Ø 7-3/4" [197mm]
9-13/16"
[250mm]
17-23/32" [450mm]
12"
[305mm]
11-3/4"
[299mm]
12-3/4" [324mm]
Top View
(with EM option)
Catalog #
Type
Date
Project
Comments
Prepared by
ENERGY DATA
13W DTT
Ballast: Electronic
120V Input Watts: 16 Line Amps: 0.13
277V Input Watts: 16 Line Amps: 0.05
18W DTT
Ballast: Electronic
120V Input Watts: 19 Line Amps: 0.15
277V Input Watts: 19 Line Amps: 0.07
26W TTT
Ballast: Electronic
120V Input Watts: 27 Line Amps: 0.23
277V Input Watts: 29 Line Amps: 0.11
32W TTT
Ballast: Electronic
120V Input Watts: 36 Line Amps: 0.31
277V Input Watts: 36 Line Amps: 0.13
42W TTT
Ballast: Electronic
120V Input Watts: 46 Line Amps: 0.38
277V Input Watts: 46 Line Amps: 0.17
Power Factor: >0.99 THD: <10%
Min. Starting Temperature: -18°C (0°F)
Sound Rating: Class A Standards
NOTES: Accessories should be ordered separately. For additional
options, please consult your Cooper Lighting Representative.
Alzak is a registered trademark of Aluminum Company of
America.
ADP121211
2016-07-20 09:52:00