Network Card User Manual

OPERATION AND MAINTENANCE

EATON Power Xpert

Gateway Series 1000 Card User’s Guide S 164201670 Rev 1

DIP Switch Description

DIP switch definitions for the PXGX Series 1000 Card are listed in

Table 13.

Table 13. DIP Switch Definitions

S1 Position

Number

OFF Position (Default) ON Position

1 Enable previously stored network

configuration settings (Normal

mode)

Override network settings to

assign private IP addresses

(Configuration mode); Port 1 is set

to 192.168.1.1 and Port 2 is set to

192.168.1.2

2 Enable the front panel RJ-45 for

serial communication

Enable the front panel RJ-45 port

for communication with an

Environmental Monitoring Probe

(EMP) device for immediate or

future use

3 Normal behavior Reset the HTTP passwords to the

defaults on boot (user and

admin). After a successful boot,

the switch should be turned back

off before rebooting the card.

4 Reserved Reserved

5 Reserved Reserved

6 Normal behavior Reset the card to factory defaults

on boot (after a successful boot,

the switch should be turned back

off before rebooting the card)