Network Card User Manual

MODBUS REGISTERS
EATON Power Xpert
®
Gateway Series 1000 Card User’s Guide S 164201670 Rev 1
60
Table 4. PDU/RPP Alarms (FC 02) (continued)
Data TypeRegisterName
Branch Breaker Overload Warning 1249 BOOL
Branch Breaker Overload 1250 BOOL
Branch Breaker Disconnected 1252 BOOL
Main Breaker Overload Warning 1253 BOOL
Main Breaker Overload 1254 BOOL
Primary Breaker Open 1256 BOOL
Primary Breaker Tripped 1257 BOOL
Secondary Breaker Open 1258 BOOL
Secondary Breaker Tripped 1259 BOOL
Input Phase Rotation 1477 BOOL
Panel Registers and Alarms
This section contains information for the Panel Summary Registers
(FC 04) and the Panel Alarms (FC 01 or 02).
Panel Summary Registers (FC 04)
NOTE The panel can be wired for either a wye (phase to neutral) or a delta
(phase-to-phase) configuration. The registers contain only the data supported by the wired
configuration. For example, if the panel is wired in a wye configuration, the voltages AN, BN,
and CN are available, but the voltages AB, BC, and CA are not available (an exception code is
returned). Refer to the actual panel for the wiring configuration.
Table 5 shows the registers that contain summary data for the panel.
The registers contain the total information for all the breakers in the
panel.