Network Card User Manual

CONFIGURING THE CARD

EATON Power Xpert

Gateway Series 1000 Card User’s Guide S 164201670 Rev 1

Management from an SNMP NMS

To access the PXGX Series 1000 Card via SNMP:

1. Use these default Community strings:

GET Community string: public

SET Community string: private

2. From the card’s Web page, click the Documentation link from the

menu bar (or visit www.eaton.com/powerxpert) for the following

MIB files for the PXGX Series 1000 Card:

MIB Name Filename Description

Eaton PDU MIB EATON-PDU-MIB.txt Meters available from the PDU, including

identification, input, output, configuration,

tests, alarms, bypass, traps, panel data, and

circuit breaker data

Eaton EMP MIB EATON-EMP-MIB.txt Meters and settings for the EMP

Eaton Alarms+Traps MIB EATON-PXG-MIB.txt Alarms and notifications (traps)

Eaton Object Identifier (OID)

assignments

EATON-OIDS.txt Base document for all OID assignments for

Eatons MIBs

RFC 4133 Entity MIB ENTITY-MIB.txt Identification and description of each device

attached to the card

RFC 4268 Entity State MIB ENTITY-STATE-MIB.txt Five availability status meters for each

device attached to the card

RFC 4268 Entity State MIB, part 2 ENTITY-STATE-TC-MIB.txt Possible state values for the Entity State MIB

Add these files to the MIB database of your SNMP management

software (such as HP OpenViewt IBM

Director, and Sun

NetManager).

3. Use the facilities provided by the SNMP management software to

access the individual MIB objects. See Chapter 4, “MIB Files,” on

page 45 for more information.