Cut Sheet

ManualsBrandsEaton/Bussmann Series ManualsFuses & Accessories10 Amp Time-Delay, Non-Rejecting In-Line Fuse, 300V

0.63"

(15.9mm)

FUSE

Dimensional Data

.720"

(18.29mm)

.850"

(21.59mm)

.850"

(21.59mm)

2.250"

(57.15mm)

.740"

(18.80mm)

.870"

(22.10mm)

.635"

(16.13mm)

.255"

(6.48mm)

.410"

(10.41mm)

Keyhole Punch

Knockout Hole

Line Lead

Load Lead

Catalog Symbols: GMF, GRF & HLR

Time-Delay

Non-Rejection Style Fuse

GMF GRF

Amperes

⁄Ω•

-6

⁄Ω¢,10

7-10

Volts AC 300 300

Interrupting Rating: 10,000 Amperes

Agency Information:

GMF and GRF Fuse:

UL Listed, Std. 248-14, Guide JDYX, File E19180

CSA Certified, C22.2 No. 248.14, Class 1422-01, File 53787

HLR Fuseholder:

UL Recognized, 12A, 300 Vac, Guide IZLT2, File E14853

CSA Certified, 12A, 300 Vac, Class 6225-01, File 47235

HLR-2A:

UL Recognized, 15A, 300 Vac, Guide IZLT2, File E14853

CSA Certified, 15A, 300 Vac, Class 6225-01, File 47235

Specialty Fuse GMF, GRF

Time-Delay, Non-Rejecting

& HLR

Form No. GMF, GRF & HLR

Page 1 of 2

Data Sheet: 2031

Bussmann

5-22-02

SB02233

Electrical Ratings for Type GMF and GRF Fuses and

Non-Rejection Style Carriers

Fuse Carrier Fuse Carrier

GMF-‹Ω¡º HLR GMF-3 HLR

GMF-⁄Ω™ HLR GMF-3¤Ω¡º HLR

GMF-ﬂΩ¡º HLR GMF-4 HLR

GMF-°Ω¡º HLR GMF-5 HLR

GMF-1 HLR GMF-6⁄Ω¢ HLR

GMF-1⁄Ω¢ HLR GRF-7 HLR

GMF-1ﬂΩ¡º HLR GRF-8 HLR

GMF-2 HLR GRF-10 HLR

GMF-2⁄Ω™ HLR GMF-10 HLR

GMF-2°Ω¡º HLR

General Information:

• HLR carrier comes with 6∑ of #18 red insulated solid copper

wire attached to the line side.

• Customer inserts a #18 insulated solid copper wire into load

side receptacle.

• Order part number HLR-2A to obtain 6∑ of #18 black insulat-

ed solid copper wire pre-installed in a load side receptacle.

• Order part number HLR-2L to obtain 6∑ of #18 black insulated

solid copper wire packaged loose (un-installed).

• An alternative to the HLR fuseholder is the A fuseholder. The

A fuseholder comes WITHOUT

leads. The customer inserts

#18 insulated solid copper wire into the line side receptacle as

well as into the load side receptacle. It has the same body

dimensions, utilizes the same mounting hole, and takes the

same mounting clips as the HLR. The A fuseholder is UL

Recognized, 10A, 300Vac, Guide IZLT2, File E14853 and CSA

Certified, 10A, 300Vac, Class 6225-01, File 47235.

• Fuse and knob are an integral one-piece unit. There are no

replacement knobs (caps).

• Units can be panel mounted with a separate steel clip. For the

knockout hole (see above), choose #BK/A-104. For the key-

hole punch type hole, choose #6374 for panels .043” to .062”

thick, or #4909 for panels .030” to .042” thick.

• Do not put tension on line (rear) terminal of fuseholder.

CE logo denotes compliance with European Union Low Voltage Directive

(50-1000 Vac, 75-1500 Vdc). Refer to Data Sheet: 8002 or contact Bussmann

Application Engineering at 636-527-1270 for more information.

FUSE AND CARRIER

MOUNTING HOLE

GMF & GRF

HLR

Summary of content (2 pages)

PAGE 1
Bussmann® Specialty Fuse GMF, GRF & HLR Time-Delay, Non-Rejecting GMF & GRF Dimensional Data FUSE 0.63" (15.9mm) HLR FUSE AND CARRIER 2.250" (57.15mm) .850" (21.59mm) Catalog Symbols: GMF, GRF & HLR Time-Delay Non-Rejection Style Fuse Line Lead GMF GRF Amperes ⁄Ω•-6⁄Ω¢,10 7-10 Volts AC 300 300 .850" (21.59mm) .720" (18.29mm) MOUNTING HOLE Interrupting Rating: 10,000 Amperes Agency Information: GMF and GRF Fuse: UL Listed, Std. 248-14, Guide JDYX, File E19180 CSA Certified, C22.2 No.
PAGE 2
Bussmann® Specialty Fuse GMF, GRF & HLR Time-Delay, Non-Rejecting AMPERE RATING 100 AMPERE RATING 10 RMS SYMMETRICAL CURRENT IN AMPERES The only controlled copy of this Data Sheet is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications.