Cut Sheet

0713 BU-SB13726 Page 1 of 3 Data Sheet # 1014
LIMITRON™ Class CC
FNQ-R — 600Vac,
1
⁄4-30A, Time-Delay Fuses
Description: Advanced protection Class CC current-limiting,
time-delay fuses.
Catalog Symbol: FNQ-R-(amp)
Ratings:
Volts — 600Vac
— 300Vdc (15 & 20A)
— 32Vdc (Self Certified)
Amps —
1
⁄4-30A
IR — 200kA Vac RMS Sym.
— 20kA Vdc (15 & 20A)
Agency Information:
CE, UL Listed, Std. 248-4, Class CC, Guide JDDZ, File E4273
CSA Certified, Class CC CSA, Class 1422-01,
File 53787–HRC-MISC
RoHS Compliant*
* FNQ-R-
1
⁄4 not RoHS complaint.
Catalog Numbers (amps)
FNQ-R-
1
⁄4 FNQ-R-1
3
⁄10 FNQ-R-3
2
⁄10 FNQ-R-8
FNQ-R-
3
⁄10 FNQ-R-1
4
⁄10 FNQ-R-3
1
⁄2 FNQ-R-9
FNQ-R-
4
⁄10 FNQ-R-1
1
⁄2 FNQ-R-4 FNQ-R-10
FNQ-R-
1
⁄2 FNQ-R-1
6
⁄10 FNQ-R-4
1
⁄2 FNQ-R-12
FNQ-R-
6
⁄10 FNQ-R-1
8
⁄10 FNQ-R-5 FNQ-R-15
FNQ-R-
3
⁄4 FNQ-R-2 FNQ-R-5
6
⁄10 FNQ-R-17
1
⁄2
FNQ-R-
8
⁄10 FNQ-R-2
1
⁄4 FNQ-R-6 FNQ-R-20
FNQ-R-1 FNQ-R-2
1
⁄2 FNQ-R-6
1
⁄4 FNQ-R-25
FNQ-R-1
1
⁄8 FNQ-R-2
8
⁄10 FNQ-R-7 FNQ-R-30
FNQ-R-1
1
⁄4 FNQ-R-3 FNQ-R-7
1
⁄2
Carton Quantity and Weight
Amp Rating Carton Qty.
1
⁄4-30 10
D
imensions - in
Features:
• The Class CC FNQ-R Limitron fuse meets the needs of con-
trol circuit transformer protection
• Current-limitation protects downstream components against
damaging thermal and magnetic effects of short-circuit
currents
• Rejection feature of FNQ-R fuses meets the need for a
rejection type fuse in equipment where available fault
current can exceed 10kA
• High inrush time-delay so control circuit transformers can
experience inrush currents up to 85 times their full-load
current rating.
• FNQ-R fuses can be sized according to NEC
®
and UL
requirements and still allow the high inrush currents, with
significantly more time-delay than the UL minimum value of
12 seconds at 200% for Class CC fuses
• Melamine tube
• Nickel-plated brass endcaps
Applications:
• Branch Circuits • Line Protection
• Small Control Transformers • Industrial Control
Recommended Fuse Blocks and Holders
Fuse Amps 1-Pole 2-Pole 3-Pole
Open Blocks
0-30 BC6031_ BC6032_ BC6033_
DIN-Rail Holders
CHCC1D_ CHCC2D_ CHCC3D_
0-30
——OPM-NG-_
——OPM-1038_
——OPM-1038_SW
Panel Mount Holders
0-30
HPS ——
HPF ——
In-Line Holders
0-30
— HEX —
HEZ ——
For additional information on Class CC fuse blocks and
holders, see Data Sheets:
• Open Blocks # 1105 (BC Series)
• DIN-Rail Holders # 3185 (CHCC), # 1109 (OPM),
# 1102 (OPM-1038), 1103 (OPM-1038_SW),
• Panel Mount Holders # 2113 (HPS), # 2114 (HPF)
• In-Line Holders # 2126 (HEX), # 2130 (HEZ)
1.5" (± 0.031)
(38.1mm)
0
.41" (± 0.005)
(10.3mm)
Maximum Acceptable Rating of Overcurrent Device
†
Maximum Rating of Overcurrent
Rated Primary Protective Device Expressed As a Percent
Current (Amps) of Transformer Primary Current Rating
< 2A 500
††
2A to 9A 167
> 9A 125
† UL 508A Table 42.1.
†† 300% for other than motor control applications.