Installation Manual

FLEXTRAY
FLEXTRAY™ - Installation
D-55
B-Line series Cable Tray SystemsEaton
Reducers
Vertical Inside & Outside Bends
Large Component Qty.
Flextray WASHER FTHDWE 1/4 SPLICE
Width SPL KIT & BTM WASHER BAR
in. (mm) (SR) (LRR) (SR) (LRR) (SR) (LRR)
4” (100) -1 - 2 -1
6”
(150) -2 - 2 -1
8”
(200) 12 4 2 21
12”
(300) 23 4 2 21
16”
(400) 23 4 2 21
18”
(450) 23 4 2 21
20”
(500) 33 4 2 21
24”
(600) 33 4 2 21
30”
(750) 33 4 2 21
32”
(800) 33 4 2 21
• 1.5” deep FLEXTRAY has only one (1) side wire
2” deep FLEXTRAY has two (2) side wires - shown
4” deep FLEXTRAY has three (3) side wires
6” deep FLEXTRAY has four (4) side wires
Straight Reducers
(SR)
Left & Right
Reducers
(LRR)
• Cut wire section as shown and bend to desired angle
• 1.5” deep FLEXTRAY has only one (1) side wire
2” deep FLEXTRAY has two (2) side wires - shown
4” deep FLEXTRAY has three (3) side wires
6” deep FLEXTRAY has four (4) side wires