Installation Manual

FLEXTRAY
FLEXTRAY™ - Installation
D-50
B-Line series Cable Tray Systems Eaton
Flextray Bender
Flextray Cutters
Part Description Qty./Box Wt./Box
Number
lbs. (kg)
CLEANSHEAR
CLEANSHEAR
1 4.3
(1.95)
Cutting Tool
• Exclusive, patented CLEANSHEAR
™
cuts tray fast
• No sharp edges
• Designed specifically for cutting Flextray
• Safely cut and bend Flextray into any configuration
1 Face tray up. Slide
cutter next to
vertical wire and
cut.
2 Turn tray to the
side with open side
facing you. Repeat
step 1 to cut wire.
Patented
Part Description Qty./Box Wt./Box
Number
lbs. (kg)
CLEANSHEAR
CLEANSHEAR BEND Cutting Tool With 1 5.4
(2.45)
Bender Attachment
• CLEANSHEAR bender has our exclusive
bending attachment
• Makes bending larger trays easy
• Recommended for bending tray widths of
16”
(400mm) or greater
Patented
3 Finish cutting all
side wires.
4 Turn tray open-side
down and cut
wires from bottom
of tray.
5 Finish cutting by
moving to other
side of tray to cut
remaining wires,