Cut Sheet

Beam Clamps
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Beam Clamps
40
Pipe Hangers & Supports
Material: Steel
Function: Recommended for the suspending of hanger rod from
the center of an I-beam, equally distributing the load on both sides
of the beam. Use with B3210 eye rod, B3211 welded eye rod
or B3200 weldless rye nut.
Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A,
Type 21 and Manufacturers Standardization Society ANSI/MSS SP-69 &
SP-58, Type 21.
Finish: Plain. Contact B-Line for alternative finishes and materials.
Order By: Part number, type, width of flange and finish.
B3050 - Beam Clamp (TOLCO Fig. 62)
Bolt and Nut Included
B
'W'
C
A
Steel Size
Bolt Size
A
Center of bolt to bottom of beam
flange.
Part No. Bolt ABC Steel Size Design Load
& Size Size
in. (mm) in. (mm) in. (mm) in. (mm) Lbs. (kN)
B3050-2
1
/2"-13 1
3
/8" (34.9)
5
/8" (15.9) 2
1
/8" (54.0)
1
/4"x1
1
/4" (6.3 x 31.7) 1000 (3.11)
B3050-5
3
/4"-10 1
7
/8" (47.6)
7
/8" (22.2) 3" (76.2)
1
/2"x2" (12.7 x 50.8) 3000 (6.67)
Flange Width
Flange Thickness Approx. Wt./100 For Beam Clamp Size
'W' Min. Max. 25
in. (mm) in. (mm) lbs. (kg) lbs. (kg)
4" (101.6)
3
/16" (4.8)
1
/2" (12.7) 116 (52.6) 429 (194.6)
5" (127.0)
5
/16" (7.9)
5
/8" (15.9) 125 (56.7) 458 (207.8)
6" (152.4)
1
/4" (6.3)
3
/4" (19.0) 134 (60.8) 486 (220.5)
7" (177.8)
7
/16" (11.1)
7
/8" (22.2) 143 (64.9) 514 (233.2)
8" (203.2)
7
/16" (11.1)
7
/8" (22.2) 152 (69.0) 543 (246.3)
9" (228.6)
9
/16" (14.3) 1" (25.4) 160 (72.6) 571 (259.0)
10" (254.0)
5
/8" (15.9) 1" (25.4) 169 (76.7) 599 (271.8)
12" (304.8)
5
/8" (15.9) 1
1
/4" (31.7) 187 (84.8) 656 (297.6)
Size Range:
3
/8"-16 thru
3
/4"-10 rod
Material: Steel
Function: Fits structural I-Beams and wide flange beams, flange
widths 3
1
/2" (88.9mm) to 8" (203.2mm), thickness up to
1
/2" (12.7mm).
Approvals: Conforms to Federal Specification WW-H-171E &
A-A-1192A, Type 54, and Manufacturers Standardization Society
ANSI/MSS SP-69 & SP-58, Type 27.
Finish: Plain. Contact B-Line for alternative finishes and materials.
Order By: Part number and finish
B3040 - Adjustable Beam Clamp (TOLCO Fig. 336)
Part Rod Size BC Steel Size Design Load Approx. Wt./100
No. A in. (mm) in. (mm) in. (mm) Lbs. (kN) Lbs. (kg)
B3040-
3
/8
3
/8"-16 2
3
/4" (69.8) 1
13
/16" (46.0)
1
/4" x 1
1
/4" (6.3 x 31.7) 300 (1.33) 120 (54.4)
B3040-
1
/2
1
/2"-13 2
3
/4" (69.8) 1
3
/4" (44.4)
1
/4" x 1
1
/2" (6.3 x 38.1) 700 (3.11) 160 (72.6)
B3040-
5
/8
5
/8"-11 3" (76.2) 1
3
/4" (44.4)
1
/4" x 1
3
/4" (6.3 x 44.4) 1000 (4.45) 216 (98.0)
B3040-
3
/4
3
/4"-10 3
3
/8" (85.7) 1
7
/8" (47.6)
3
/8" x 2
1
/2" (9.5 x 63.5) 1800 (8.00) 442 (200.5)
J-Hook and Hex
Nut Included
A
(Rod Size)
Hanger Rod
Not Included
C
Center of J-Hook to bottom
of clamp body.
B
Steel Size
C