Cut Sheet
VRP Type - Rubber Cube Vibration Pad
Use: Dampen noise and vibration in floor caused by medium and high speed equipment.
Features: The VRP pad is made of a natural
rubber composition that will withstand a load
of 45 Lbs. per 1" square. Rated deflection is
3
/16" (4.7). Each square has 4 suction holes
(
1
/2" (12.7) diameter) to provide a non-skid
effect. The standard VRP pad has 81 squares
that are 2" x 2"
(50.8 x 50.8) making the pad
itself 18" x 18" (457.2 x 457.2). These squares
are easily cut or torn to desired sizes.
CNNK Type - Cork, Ribbed Neoprene and Steel Vibration Pad
Use: Dampen noise and vibration in floor caused by medium and high speed equipment.
13
/16" (20.6)
dia. hole
'L'
'W'
Note: Has
1
/4" (6.3) thick
steel plate for even weight
distribution. Hole in center
will accept up to
3
/4" (19.0)
bolt.
1
1
/2"
(38.1)
Rated Wt.
Part Load
Dimensions
Std. Each
No. Lbs. kN 'L' 'W' Pkg. Lbs. kg
CNNK-4 200 (.89) 2" (50.8) 2" (50.8) 48 .40 (.18)
CNNK-9 450 (2.00) 3" (76.2) 3" (76.2) 36 .90 (.41)
CNNK-16 800 (3.56) 4" (101.6) 4" (101.6) 24 1.60 (.73)
CNNK-25 1250 (5.56) 5" (127.0) 5" (127.0) 24 2.50 (1.13)
CNNK-36 1800 (8.00) 6" (152.4) 6" (152.4) Bulk 3.50 (1.59)
CNNK-64 3200 (14.23) 8" (203.2) 8" (203.2) 6 6.20 (2.81)
Features: The CNNK pad is made of oil-resistant
neoprene. The pad has an alternate height rib
pattern to minimize slip. Recommended load is 50
Lbs.
(.22 kN) per inch
2
(.0006 m
2
) with a range of
25-70 Lbs. (.11-.31 kN) per inch
2
(.0006 m
2
). The
CNNK type is rated at
3
/16" (4.7) deflection. For
greater deflection, use multiple pads in layers.
Typical Applications: Air conditioners, cooling
towers, compressors, fans, generators, pumps,
piping, process equipment, transformers, etc.
Rated Wt.
Part Load
Dimensions
Std. Each
No. Lbs. kN 'L' 'W' Pkg. Lbs. kg
VRP-4 180 (.80) 2" (50.8) 2" (50.8) Bulk .10 (.05)
VRP-16 720 (3.20) 4" (101.6) 4" (101.6) Bulk .41 (.19)
VRP-36 1620 (7.20) 6" (152.4) 6" (152.4) Bulk .90 (.41)
VRP-324 14580 (64.85) 18" (457.2) 18" (457.2) 3 8.15 (3.70)
'W'
'L'
3
/4"
(19.0)
Vibra Trol
VRP-16 shown
Vibra Trol
®
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
171