Fasteners RUFFIN-16 Ruff-IN™ pre-fab systems
Energizing a world that demands more. Discover today’s Eaton. Powering business worldwide As a global power management company, we help customers worldwide manage the power needed for buildings, aircraft, trucks, cars, machinery and businesses. Eaton’s innovative technologies help customers manage electrical, hydraulic and mechanical power more reliably, efficiently, safely and sustainably.
Ruff-IN™ Table of Contents Table of Contents ................................................................ 1 Ruff-IN Products Brackets & Support Pictorial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Telescoping Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Box Mounting Clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ruff-IN™ Products Brackets & Supports Brackets & Supports Telescoping Brackets (page 3) Double Sided Box Support Brackets (page 5) Single Sided Box Support Brackets (page 5) Box Mounting Clips (page 3) Floor Mount Box Supports (page 4) Multiple Box Mounting Brackets (page 8) Double Sided Support Brackets (page 6) Uni-Mount Box Supports (page 9) Open Box Mounting Brackets (page 8) Box Support Brackets (page 7) Box Mounting Bracket Accessories (page 10) Heavy Duty Electrical Box Hanger (page 9) Flo
Ruff-IN™ Products Telescoping Brackets Brackets & Supports Features • Completely adjustable, fits a range of stud spacing BB2-16T • Mounts 11/2”, 21/8”, 21/2”, and 213/16” deep boxes • Increased rigidity through center groove design • Only two screws required to mount 11/2” and 21/8’ box depths • Pre-punched screw holes provide for easy box installation • Bar is marked with a scale for stud spacing • Finish: Pre-galvanized BB2-24T UPC/Part Number Catalog Number Stud Spacing Box Qty.
Ruff-IN™ Products Floor Mount Box Supports Features Brackets & Supports • BBF floorstand provides the most rigid support in the industry • Far-side support accomodates 6”, 51/2”, 35/8”, and 21/2” stud depths • Fold-out tab built-in to attach floor stand to stud if desired • Integral “wings” provide rigid support when floorstand is mounted between studs • Optional cable containment clip securely attaches to floorstand without hardware • Patented Marty Mouse ears enable boxes to be secured with or without
Ruff-IN™ Products Double Sided Box Support Bracket Brackets & Supports Features BB74 shown • Double sided box support designed for Pre-Fab installations. Unit can be installed on either side of stud without repositioning box or devices • Patented Marty-Mouse ears feature an innovative keyhole pattern to secure outlet box to bracket with or without plaster ring • Marty-Mouse ears simplify wiring of pre-fab units.
Ruff-IN™ Products Double Sided Support Brackets Brackets & Supports BB4-23D BB4-4D BB4-6D Features • Improved far-side support prevents box movement in wall cavity • Adjustable far-side supports designed to reduce labor • Ruff-IN assemblies available with box, plaster ring and ground wire UPC/Part Number Catalog Number Stud Size Box Qty 799038 48375 BB4-23D 31/2” & 21/2” 50 799038 48376 799038 48377 4”, BB4-4D 6”, BB4-6D 31/2” 51/2”, & 21/2” 31/2”, 21/2” 50 50 Notes: Read safety/ins
Ruff-IN™ Products Brackets & Supports Box Support Brackets Features BB70 *BB70E (Sold separately, must be used with BB70) • • Interlocking wrap-around design provides extra rigidity • • • • Adjustable for varying stud depths (21/2” to 6”) • • Finish: Pre galvanized Compatible with 1-gang and 2-gang Rapid Ring™ and adjustable plaster rings (see pages 11 & 12) Integral mounting tabs for attaching plaster rings Multiple brackets may be ganged together Available factory assembled as part of the Ruff
Ruff-IN™ Products Multiple Box Mounting Brackets Brackets & Supports Features • Increased strength and rigidity help withstand the stress of drywall installation 3 2 • Supports most US & Canadian boxes and plaster rings 4” SQ.
Ruff-IN™ Products Uni-Mount™ Box Supports Brackets & Supports Features • Uni-Mount provides a secure box support and features a built-in plaster ring • Rigid bracket design eliminates the need for far-side support • Guide tabs ensure alignment on studs • Ruff-In assemblies available with box, plaster ring and ground wire • Fire stop pad can be pre-installed in boxes if desired BB40-10 • Not recommended for pre-installed wiring devices See BB70 on page 7 for an improved Pre-Fab assembly solution BB45-08
Ruff-IN™ Products Box Mounting Bracket Accessories Features Brackets & Supports • BBFS-18 floor stand ensures consistent box height and eliminates need to measure for proper install height • Can be used with BB7, and BB8 brackets (see page 8) • Finish: Pre-galvanized BBFS-18 UPC/Part Number 79903851597 Catalog Number Description Box Qty.
Ruff-IN™ Products Rapid Ring™ Products Brackets & Supports Features • Self-adjusting to various wall thickness and types of tile • Easy off/quick release protective plate • Works with wall thickness up to 2” • Completely tool-free trim-out phase • Manufactured in the USA with union-made assemblies • Fits most standard boxes and B-Line series brackets • One-source supplier for full line of 1-gang to 4-gang product offerings • Easy to route around raised surface on the protective plate • UL Listed Box Plate
Ruff-IN™ Products Rapid Ring™ Sleeve Brackets & Supports B1RRR B2RRR B3RRR B4RRR UPC/Part Number Catalog Number 782051 68741 B1RRR 1-Gang - 4” & 411/16” Square Electrical Box 1, 4, 5 25 782051 68742 B2RRR 2-Gang - 4” & 411/16” Square Electrical Box 1, 4, 5 25 782051 68743 782051 68744 Box Qty Use WIth B3RRR B4RRR 3-Gang - Electrical Box 1, 4, 5 10 4-Gang - Electrical Box 1, 4, 5 10 Covered by and/or use under one or more of the following U.S.
Ruff-IN™ Products Basic Prefab Assemblies Basic Prefab Assemblies BB2TSC Series (pages 15 & 16) BB816 Series (pages 17 & 18) BB716 Series (pages 19 & 20) BB70 Series (pages 21 & 22) Notes: Read safety/installation instruction sheet in packages before use.
Ruff-IN™ Products Basic Ruff-IN™ “I own a pre-fab shop, and I need high-quality, innovative components that will keep me versatile for my customers’ projects.” Whether you run your own pre-fab shop or simply want maximum project control, Basic Ruff-IN can provide a profitable pre-fab solution that perfectly suits your operation. Keep control of your project, keep your crew working and garner the cost- and time-saving benefits of pre-fab with Basic Ruff-IN assemblies.
Ruff-IN™ Products Basic Prefab Assemblies BB2TSC Series Back of box assembly Features • Box assembly comes with box mounting clip attached. • BB2TSC boxes can be field mounted, in the proper location, to telescoping brackets by snapping the box mounting clip (on the back of the box assembly) over the installed bracket.. • Telescoping brackets can be purchased separately (see page 3).
Ruff-IN™ Products BB2TSC Series - cont. Assembly Part Number & Components - cont.
Ruff-IN™ Products Basic Prefab Assemblies BB816 Series Features • Increased strength and rigidity help withstand the stress of stress of drywall installation. • Assemblies shipped with box installed on left side of bracket, as shown below, unless otherwise specified.
Ruff-IN™ Products BB816 Series - cont. Assembly Part Number & Components - cont.
Ruff-IN™ Products Basic Prefab Assemblies BB716 Series Features • Increased strength and rigidity help withstand the stress of stress of drywall installation. • Assemblies shipped with box installed on left side of bracket, as shown below, unless otherwise specified. • Assemblies include BB7AP alignment plate for easy adjustment of box location.
Ruff-IN™ Products BB716 Series - cont. Assembly Part Number & Components - cont.
Ruff-IN™ Products Basic Prefab Assemblies BB70 Series Features • Interlocking wrap-around design provides extra rigidity. • Bracket pre-assemblied at 35/8”, back tabs can be folded out for 4”, purchase BB70E as add on for 51/2” and 6” stud spacing options. • Multiple brackets may be ganged together.
Ruff-IN™ Products BB70 Series - cont. Assembly Part Number & Components - cont.
Ruff-IN™ Products Accessories Firestop Pads (page 25) Accessories Adjustable Plaster Rings (page 24) Conduit Quick Caps & Spacers (page 27) Metal Protector Plates (page 26) Concrete Box Clamp (page 28) Cable Supports (page 29 & 30) Notes: Read safety/installation instruction sheet in packages before use.
Ruff-IN™ Products Adjustable Plaster Rings Features • Adjustable plaster ring can be used with 4” square, 21/8” deep boxes and fits a range of drywall thicknesses • Plaster ring can be adjusted after sheet rock, mud, or tile is installed without removing the wiring devices • Helps reduce labor and requirements for multiple products of varying wall thicknesses B2AJ B1AJ UPC/Part Number Accessories BRAJ B3AJ Catalog Number Description 782051 49200 B1AJ One Device Adjustable Ring 3/4” - 11/2” 25
Ruff-IN™ Products Firestop Pads Features • SpecSeal®† Power Shield electrical box inserts are used to protect an electrical box and maintain fire-resistance ratings of wall assemblies when the horizontal separation between metallic boxes on opposite sides of the wall is less than 24” • The intumescent insert is designed to install inside the box, directly against the back wall • SpecSeal®† Power Shield expands a minimum of 24 times its original size, when exposed to high temperatures or flames, to quickly s
Ruff-IN™ Products Metal Protector Plates BPS1 Features • Protects box contents from drywall mud, paint and debris • Protector plates provided with all wiring device assemblies • Can be installed on plaster rings with or without preinstalled wiring devices.
Ruff-IN™ Products Conduit Quick Caps & Spacers Features • Quick caps and spacers help eliminate the time consuming method of duct taping conduit stubs • Quick spacers are designed to separate and secure conduit during concrete pours • Quick anchor spacers are designed to separate and secure conduit with rod anchor hole during concrete pours • Quick caps maintain spacing and help keep conduit free from dirt and debris • Quick caps and spacers properly space conduit for any 4” square box Accessories • New E
Ruff-IN™ Products Concrete Box Clamp Features • • • • • UPC/Part Number 79903863423 Secures electrical boxes in concrete block Quickly installs with no tools required Works for single or double gang boxes Completely re-usable Able to be used with flush mount rings or penetrating rings when block wall will be covered Catalog Number Description Box Qty. BB-4SCBC Concrete Box Clamp 25 Accessories Notes: Read safety/installation instruction sheet in packages before use.
Ruff-IN™ Products Cable Support Features • • • • • UPC/Part Number Catalog Number Description Box Qty. 79903843761 BRC6M Cable Support 100 Can be push mounted to stud for positioning Stiffening ribs and more material for rigid design Zip tie locking tab allows trouble-free securing of cables Attaches to stud using only one screw Allows cables to be positioned a minimum of 11/4" from face of stud as required by NEC Article 300.
Ruff-IN™ Products Cable Support Features • For use on wood or metal stud • Allows cables to be positioned a minimum of 11/4" from face of stud as required by NEC Article 300.4(D) Accessories UPC/Part Number Catalog Number Description Box Qty.
Ruff-IN™ Products - Index Index Part No. Page # Part No. Page # Part No. Page # B1AJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 B1RRE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 B1RRP4C . . . . . . . . . . . . . . . . . . . . . . . . . . 11 B1RRP5C . . . . . . . . . . . . . . . . . . . . . . . . . . 11 B1RRR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 BB45-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 BB45-12 . . . . . . . . .
Ruff-IN™ Products NOTICE Eaton reserves the right to change the specifications, materials, equipment, prices or the availability of products at any time without prior notice. While every effort has been made to assure the accuracy of information contained in this catalog at the time of publication, we are not responsible for inaccuracies resulting from undetected errors or omissions.
U.S. Customer Service Center is staffed Monday through Friday from 7 a.m. to 5:00 p.m. Central Standard Time. For more information, visit www.eaton.com/b-lineseries. Eaton 509 West Monroe Street Highland, IL 62249 United States Phone: (800) 851-7415 www.cooperbline.com/contactus Eaton 5925 McLaughlin Road Mississauga, ON L5R 1B8 Canada Phone: (800) 569-3660 www.cooperbline.com/contactca Eaton 1000 Eaton Boulevard Cleveland, OH 44122 United States Eaton.
