Cut Sheet

B2000 SERIES
PIPE AND CONDUIT CLAMPS
• Safety Factor of 5
• Add PA to suffix for pre-assembled pipe clamps
• Includes Combination Recess Hex Head Machine Screw and Square Nut
• Material: 16 Ga.
(1.5), 14 Ga. (1.9), 12 Ga. (2.6) ASTM A1011 33,000 PSI
min. yield and 11 Ga.
(3.0) ASTM A1011HSLA Gr. 50
• Standard finishes: ZN
, HDG, SS4, SS6, AL
Note: For EMT sizes 2
1
/2” and larger use rigid conduit sizes.
Conduit Material Design Load 1 Design Load 2 Design Load 3 Wt./C
Part No. Size Thickness
Lbs. kN Lbs. kg Lbs. kg Lbs. kg
B2000
3
/8” (10) 16 Ga. (1.5) 400 (1.78) 50 (.22) 50 (.22) 10 (4.5)
B2001
1
/2” (15) 16 Ga. (1.5) 400 (1.78) 50 (.22) 50 (.22) 10 (4.5)
B2002
3
/4” (20) 16 Ga. (1.9) 400 (1.78) 50 (.22) 50 (.22) 11 (5.0)
B2003 1” (25) 14 Ga. (1.9) 600 (2.67) 75 (.33) 75 (.33) 16 (7.2)
B2004 1
1
/4” (32) 14 Ga. (1.9) 600 (2.67) 75 (.33) 75 (.33) 19 (8.6)
B2005 1
1
/2” (40) 12 Ga. (2.6) 800 (3.56) 125 (.56) 125 (.56) 28 (12.7)
B2006 2” (50) 12 Ga. (2.6) 800 (3.56) 125 (.56) 125 (.56) 33 (14.9)
Conduit Material Design Load 1 Design Load 2 Design Load 3 Wt./C
Part No. Size Thickness
Lbs. kN Lbs. kg Lbs. kg Lbs. kg
B2001
3
/8” (10) 16 Ga. (1.5) 400 (1.78) 50 (.22) 50 (.22) 10 (4.5)
B2008
1
/2” (15) 16 Ga. (1.5) 400 (1.78) 50 (.22) 50 (.22) 11 (5.0)
B2009
3
/4” (20) 14 Ga. (1.9) 600 (2.67) 75 (.33) 75 (.33) 15 (6.8)
B2010 1” (25) 14 Ga. (1.9) 600 (2.67) 75 (.33) 75 (.33) 16 (7.2)
B2011 1
1
/4” (32) 14 Ga. (1.9) 600 (2.67) 75 (.33) 75 (.33) 20 (9.1)
B2012 1
1
/2” (40) 12 Ga. (2.6) 800 (3.56) 125 (.56) 125 (.56) 30 (13.6)
B2013 2” (50) 12 Ga. (2.6) 800 (3.56) 125 (.56) 125 (.56) 34 (15.4)
B2014 2
1
/2” (65) 12 Ga. (2.6) 800 (3.56) 125 (.56) 125 (.56) 38 (17.2)
B2015 3” (80) 12 Ga. (2.6) 800 (3.56) 125 (.56) 125 (.56) 44 (19.9)
B2016 3
1
/2” (90) 11 Ga. (3.0) 1000 (4.45) 200 (.89) 150 (.67) 61 (27.6)
B2017 4” (100) 11 Ga. (3.0) 1000 (4.45) 200 (.89) 150 (.67) 66 (29.9)
B2018 4
1
/2” (115) 11 Ga. (3.0) 1000 (4.45) 200 (.89) 150 (.67) 70 (31.7)
B2019 5” (125) 11 Ga. (3.0) 1000 (4.45) 200 (.89) 150 (.67) 77 (34.9)
B2020 6” (150) 11 Ga. (3.0) 1000 (4.45) 200 (.89) 150 (.67) 100 (45.3)
B2021 7” (175) 11 Ga. (3.0) 1000 (4.45) 250 (1.11) 200 (.89) 115 (52.1)
B2022 8” (200) 11 Ga. (3.0) 1000 (4.45) 250 (1.11) 200 (.89) 128 (58.0)
B2130 10 (254) 11 Ga. (3.0) 1000 (4.45) 250 (1.11) 200 (.89) 160 (72.6)
B2132 12” (305) 11 Ga. (3.0) 1000 (4.45) 250 (1.11) 200 (.89) 185 (83.9)
THINWALL CONDUIT (EMT) CLAMPS
RIGID CONDUIT OR PIPE CLAMPS
Design Load 1
Design Load 3
Design Load 2
Pipe/Conduit Clamps &
Hangers
Reference page 126 for general fitting and standard finish specifications.
Pipe Clamps
Strut Systems
128