Cut Sheet
Catalog No. Height
in. mm
9(*)-8014 4 101
9(*)-8015 5 127
9(*)-8016 6 152
Catalog No. Height
in. mm
9(*)-8004 4 101
9(*)-8005 5 127
9(*)-8006 6 152
Splice Plates
• Standard 8-hole pattern for all stainless
steel splice plates.
• Furnished in pairs with hardware.
• One pair including hardware provided
with straight section.
• Boxed in pairs with hardware.
• (*) Insert or
Catalog No. Cable Tray Tray
No. End Cut Width 'L'
9(*)-803(X) Mitered Thru 36" N/A
9(*)-803(X)-12 Not Mitered Thru 12" 16"
9(*)-803(X)-36 Not Mitered Thru 36" 41"
Catalog No. Height
in. mm
9(*)-8045 5 to 4 127 to 101
9(*)-8046 6 to 4 152 to 101
9(*)-8060 6 to 5 152 to 127
Catalog No. Height
in. mm
9(*)-8004-
1
/2 4 101
9(*)-8005-
1
/2 5 127
9(*)-8006-
1
/2 6 152
Catalog No. Height
in. mm
9(*)-8244 4 101
9(*)-8245 5 127
9(*)-8246 6 152
9(*)-803(X)
Splice only
9(*)-803(X)-12 or 9(*)-803(X)-36
One pair splice plates with extensions.
Universal Splice Plates
• Used to splice to existing cable
tray systems.
• Furnished in pairs with
hardware.
• (*) Insert or
Catalog No. Height
in. mm
9(*)-8024 4 101
9(*)-8025 5 127
9(*)-8026 6 152
Horizontal Adjustable Splice Plates
• Offered to adjust a cable tray run
for changes in direction in
a horizontal plane that do
not conform to standard
horizontal fittings.
• Furnished in pairs with hardware.
• New design bonding jumpers
not
required.
• (*) Insert or
• (X) Insert 4, 5 or 6 for
side rail height.
Step Down Splice Plates
• These splice plates are offered
for connecting cable tray
sections having side rails of
different heights.
• Furnished in pairs
with hardware.
• (*) Insert or
Expansion Splice Plates
• Expansion plates allow for one inch
expansion or contraction of the cable tray,
or where expansion joints occur in
the support structure.
• Furnished in pairs with hardware.
• Bonding Jumpers are required.
Order Separately.
• (*) Insert or
For heavy duty expansion
splice plates see page APP-3.
Vertical Adjustable Splice Plates
• These plates provide for changes in
elevation that do not conform to
standard vertical fittings.
• Furnished in pairs with hardware.
• (*) Insert or
Branch Pivot Connectors
• Branch from existing cable tray runs at any point.
• Pivot to any required angle.
• UL Classified for grounding
(bonding jumper not required).
• Furnished in pairs with hardware.
• (*) Insert or
L
L
Series 3 & 4 Stainless Steel
SS4 SS6
SS4 SS6
SS4 SS6
SS4 SS6
SS4 SS6
SS4 SS6
SS4 SS6
Requires
supports
within 24”
on both
sides, per
NEMA VE 2.
Requires
supports within
24” on both
sides, per
NEMA VE 2.
Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items
SST-6
Series 3 & 4 Stainless Steel - Accessories
Cable Tray Systems