Cut Sheet

Type 4X Stainless Steel JIC Continuous Hinge Cover Enclosures
Data Sheet
Construction
• Enclosure and cover are fabricated from (16) gauge,
Type 304 or Type 316L stainless steel
• All continuous welded seams are finished smooth
• Cover is secured to the body with a stainless steel
continuous hinge and pin on one side and easy-to-operate
stainless steel screw clamps mounted to the opposite side
• Cover has a fixed, oil and water-resistant gasket
• Ground stud provided on cover
• #10-32 weldnuts are provided for mounting
optional panel
• External mounting feet are provided for secure wall mounting
Finish
• Outer surface of enclosure and cover has a smooth
brushed finish
Accessories
• Panels
• JIC terminal strap kit
• JIC terminal strip kit
• Terminal blocks
• See Accessories section
Application
• Houses electrical controls and instruments
• Intended for indoor or outdoor use where a corrosive
environment exists
• Protects against corrosion, windblown dust and rain,
splashing water and hose directed water
Standards
• UL 508 listed, Type 4X, Type 4, Type 13 and Type 12
• CSA C22.2 No.94 certified, Type 4X, Type 4,
Type 13 and Type 12
• Conforms to NEMA standard for Type 4X, Type 4,
Type 13 and Type 12
• Conforms to JIC standard EGP-1-1967
• IEC 60529, IP66
Type 4X Enclosures
Notes: Cooper B-Line can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.
180
Type 4 X Enclosures